| Model | KF1215FD18R-P |
|---|---|
| Size | 120 mm |
| Thickness | 17 mm |
| Speed range | 300–1800 RPM |
| Max airflow | 50.79 CFM |
| Max pressure | 1.35 mmH₂O |
| Max noise | 30 dBA |
| Connector | 4-pin PWM + 4-pin RGB |
| Lighting | RGB |
| Colour | Black |
More Scythe fans · All 120mm models · Browse the full fan database
About the Scythe Kaze Flex 120 Slim RGB KF1215FD18R-P Fan
The Scythe Kaze Flex 120 Slim RGB KF1215FD18R-P is a 120 mm fan that is only 17 mm thick, so it suits builds where a standard 25 mm fan will not clear a cooler, radiator or case panel. Its 300 to 1800 RPM range is controlled through a 4-pin PWM header, and the rated 50.79 CFM airflow with 1.35 mmH2O static pressure points to a balanced role: it moves a useful amount of air in open case positions while still offering enough pressure for mildly restrictive intake filters or slim radiators. Buyers with dense, high-fin radiators should note that the pressure figure is modest rather than class-leading.
The rated noise is 30 dB(A) at the top of its range, so expect the fan to be most noticeable near 1800 RPM and quieter when PWM lowers it toward 300 RPM. RGB lighting is delivered through a separate 4-pin RGB connector in addition to the PWM plug, so the build needs both a fan header and an RGB header or controller. The frame is black. The manufacturer data does not list a price or release year.
Frequently asked questions
Is the Scythe Kaze Flex 120 Slim RGB KF1215FD18R-P quiet?
Its rated noise is 30 dB(A) at the maximum 1800 RPM. Because PWM control spans 300 to 1800 RPM, the fan can run at lower speeds and reduced noise, though the data does not give a noise figure for those lower speeds.
What is this slim 120 mm fan best used for?
With 50.79 CFM airflow and 1.35 mmH2O static pressure, it suits case intake or exhaust and mildly restrictive setups where its 17 mm thickness helps. Its pressure is modest, so dense high-fin radiators are not its strongest use.
Does the KF1215FD18R-P need two connections for PWM and RGB?
Yes. It uses a 4-pin PWM connector for fan speed control and a separate 4-pin RGB connector for lighting. Your system needs a PWM fan header plus an RGB header or controller. The data does not list a price.















