| Model | KFS1215FD18-P |
|---|---|
| Size | 120 mm |
| Thickness | 15 mm |
| Speed range | 300–1800 RPM |
| Max airflow | 48.0 CFM |
| Max pressure | 1.36 mmH₂O |
| Max noise | 27.8 dBA |
| Connector | 4-pin PWM |
| Lighting | None |
| Colour | Black |
More Scythe fans · All 120mm models · Browse the full fan database
About the Scythe Kaze Flex II 120 Slim KFS1215FD18-P Fan
The Kaze Flex II 120 Slim KFS1215FD18-P is a 120mm fan just 15mm thick, which makes it a candidate where a standard 25mm fan will not clear a cooler, radiator or case panel. Its 300 to 1800 RPM range is controlled through a 4-pin PWM connector, so the board sets the speed rather than a fixed curve. At the top end Scythe rates it at 48.0 CFM and 1.36 mmH2O static pressure, a moderate balance that suits airflow through a case or a thin radiator better than pushing through dense fins, where higher-pressure fans are usually chosen. The listed noise figure is 27.8 dB(A) at maximum speed, so expect the fan to be audible when it runs flat out and quieter as PWM lowers the RPM.
The frame is black with no lighting, so it disappears inside a build rather than adding RGB. Mounting uses standard 120mm screw spacing, but the 15mm depth means the usual 25mm screws may be too long, so check what your cooler or case supplies. Scythe does not list a price or release year in this data, so those cannot be confirmed here.
Frequently asked questions
Is the Scythe Kaze Flex II 120 Slim KFS1215FD18-P quiet?
Scythe rates it at 27.8 dB(A) at its 1800 RPM maximum. Because it is PWM controlled from 300 RPM, the noise level depends on the speed your motherboard commands, and the data does not list figures for lower speeds.
What is this slim 120mm fan best used for?
With 48.0 CFM and 1.36 mmH2O static pressure, it suits case airflow and low-profile or thin-radiator builds where 15mm depth is required. For dense heatsinks or thick radiators, higher static pressure is usually preferred.
Does the KFS1215FD18-P have RGB lighting, and what connector does it use?
No, the data lists no lighting and a black colour. It connects with a 4-pin PWM header, which lets the motherboard control its 300 to 1800 RPM range. The data does not list a price or release year.















