| Model | WT1225FD25AR-P |
|---|---|
| Size | 120 mm |
| Thickness | 26 mm |
| Speed range | 350–2500 RPM |
| Max airflow | 75.17 CFM |
| Max pressure | 3.39 mmH₂O |
| Max noise | 35.57 dBA |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | Black |
More Scythe fans · All 120mm models · Browse the full fan database
About the Scythe Wonder Tornado 120 ARGB WT1225FD25AR-P Fan
The Scythe Wonder Tornado 120 ARGB WT1225FD25AR-P is a 120 mm fan that is 26 mm thick rather than the usual 25 mm, so check clearance at the mounting point before buying. Its 350 to 2500 RPM range covers both idle and load use, and the 75.17 CFM airflow figure suits open case ventilation and rear or top exhaust. The 3.39 mmH2O static pressure is the stronger number here, which makes the fan a reasonable pick for pushing air through a radiator or a dense dust filter where low-pressure fans struggle.
Noise is rated at 35.57 dB(A), which is the top of the range at 2500 RPM, so expect a clearly audible fan at full speed and a much quieter result near the 350 RPM minimum. The 4-pin PWM connector allows speed control from the motherboard, and the separate 3-pin ARGB header drives the lighting, so your board needs an ARGB header or a compatible controller. The fan is black. The manufacturer data does not list a price or release year.
Frequently asked questions
Is the Scythe Wonder Tornado 120 ARGB quiet at low RPM?
The data lists a 350 RPM minimum and a 35.57 dB(A) maximum noise figure, so the fan can run slowly and quietly. The exact noise at 350 RPM is not listed, only the top figure at 2500 RPM.
Is this fan better for a radiator or for case airflow?
It offers 75.17 CFM airflow and 3.39 mmH2O static pressure. The static pressure figure makes it suitable for radiators and dust filters, while the airflow figure also supports general case ventilation in a 120 mm mount.
Does the Scythe Wonder Tornado 120 ARGB need a special motherboard header?
It uses a 4-pin PWM connector for fan speed and a separate 3-pin ARGB connector for lighting. Your motherboard or controller needs an ARGB header, and the 26 mm thickness should be checked against your mounting space.















