| Model | SST-FHL120 |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 800–3000 RPM |
| Max airflow | 95.1 CFM |
| Max pressure | 5.2 mmH₂O |
| Max noise | 39.6 dBA |
| Bearing | Dual Ball Bearing |
| Connector | 4-Pin PWM |
| Lighting | None |
| Colour | Black |
SST-FHL120 is a 25 mm thick 120 mm non-LED fan reaching 3000 RPM with 95.1 CFM and 5.2 mmH2O static pressure
More SilverStone fans · All 120mm models · Browse the full fan database
About the SilverStone FHL120
The SilverStone FHL120 is a 120mm by 25mm fan built around pressure rather than silence. Its 5.2 mmH2O static pressure rating is the headline figure, and combined with 95.1 CFM of airflow it suits dense heatsinks, radiators and restrictive front panels where a low-pressure fan would stall. The 800 to 3000 RPM range is wide, so you can run it slow for everyday airflow or push it hard when load demands it. Expect noise to follow speed: the data lists 39.6 dB(A), which reflects the fan near its maximum, so plan on a fan curve rather than full tilt.
Mounting is standard 120mm with 25mm thickness, and the 4-pin PWM connector lets a motherboard control speed directly. The dual ball bearing is a durability-oriented choice. There is no lighting and the frame is black, so it disappears inside a build. The manufacturer data does not list a price or release year, so check current retail listings for cost.
Frequently asked questions
Is the SilverStone FHL120 a quiet fan?
The listed noise figure is 39.6 dB(A), which is measured at the fan's high end of 3000 RPM. Because it spans 800 to 3000 RPM with PWM control, you can run it slower for lower noise, but the data gives no separate figure for minimum speed.
What is the FHL120 best used for?
With 5.2 mmH2O static pressure and 95.1 CFM airflow, it is aimed at high-impedance situations such as radiator fins, dense heatsinks or restrictive case intakes. It is a pressure-focused 120mm fan rather than a low-noise airflow-only model.
Does the SilverStone FHL120 have RGB lighting?
No. The manufacturer data lists lighting as none, and the fan colour is black. It is a plain black 120mm fan with a 4-pin PWM connector and dual ball bearing, so it is suited to builds where no illumination is wanted.
More SilverStone fans
Other 120mm fans
Thermaltake Pure Plus 12 RGB Radiator Fan TT Premium Edition 3-Fan Pack
Thermaltake Pure 12 ARGB Sync Radiator Fan TT Premium Edition 3-Fan Pack
Thermaltake Riing 12 LED RGB Radiator Fan Sync Edition 3-Fan Pack
SilverStone Air Blazer 120RW ARGB
SilverStone Air Slimmer 120
SilverStone Air Slimmer 120 ARGB









