| Model | SST-AP120SKB-ARGB |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | –2000 RPM |
| Max airflow | 51.32 CFM |
| Max pressure | 2.30 mmH₂O |
| Max noise | 33.5 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-Pin PWM + 4-1 Pin ARGB |
| Lighting | ARGB |
| Colour | Black |
SST-AP120SKB-ARGB is a 25 mm thick 120 mm ARGB fan reaching 2000 RPM with 51.32 CFM and 2.30 mmH2O static pressure
More SilverStone fans · All 120mm models · Browse the full fan database
About the SilverStone Air Penetrator 120SK ARGB
The Air Penetrator 120SK ARGB balances airflow and pressure for a 120mm fan. Its 51.32 CFM airflow suits open case intake and exhaust positions, while 2.30 mmH2O static pressure gives it enough push for heatsinks, radiators and mesh-fronted cases where resistance is higher. At a maximum of 2000 RPM it is rated at 33.5 dB(A), so expect audible airflow at full speed; PWM control lets you dial it down when load is light.
Mounting is standard for a 120mm fan: 120mm diameter, 25mm thickness, so it fits common 120mm case and cooler mounts. The 4-Pin PWM connector handles speed control, and the 4-1 Pin ARGB connector drives the lighting, which needs an ARGB header on the motherboard or controller. The bearing is Fluid Dynamic Bearing and the frame is black. The data does not list a price or release year, so check the retailer for current pricing.
Frequently asked questions
Is the SilverStone Air Penetrator 120SK ARGB quiet?
SilverStone rates it at 33.5 dB(A) at its 2000 RPM maximum, so it is not silent at full speed. Because it uses 4-Pin PWM, you can lower the speed for quieter running when full airflow is not needed.
Is this fan better for case airflow or a radiator?
It offers 51.32 CFM airflow and 2.30 mmH2O static pressure. That combination suits case intake and exhaust, and the pressure figure also makes it usable on heatsinks, radiators or mesh-fronted cases where airflow meets resistance.
What connectors and size does the 120SK ARGB need?
It is a 120mm fan with 25mm thickness, so it fits standard 120mm mounts. It uses a 4-Pin PWM connector for speed control and a 4-1 Pin ARGB connector for lighting, which requires a compatible ARGB header or controller.














