| Model | SST-AB120R-ARGB |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 600–2200 RPM |
| Max airflow | 93.97 CFM |
| Max pressure | 3.53 mmH₂O |
| Max noise | 35.6 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-Pin PWM + 4-1 Pin ARGB |
| Lighting | ARGB |
| Colour | Black |
SST-AB120R-ARGB is a 25 mm thick 120 mm ARGB fan reaching 2200 RPM with 93.97 CFM and 3.53 mmH2O static pressure
More SilverStone fans · All 120mm models · Browse the full fan database
About the SilverStone Air Blazer 120R ARGB
The Air Blazer 120R ARGB is a 120mm by 25mm fan built for buyers who need both strong airflow and high static pressure. Its 93.97 CFM airflow suits open case ventilation, while the 3.53 mmH2O static pressure rating is the figure to watch when pushing air through dense radiators, heatsinks or restrictive mesh filters. The 600 to 2200 RPM range lets you tune between low-speed running and maximum performance.
Noise is rated up to 35.6 dB(A), so expect the fan to be audible near its 2200 RPM ceiling and quieter toward the 600 RPM floor. The hydraulic bearing is listed as the bearing type. Mounting uses a standard 120mm 25mm frame, and the 4-Pin PWM connector handles speed control while the 4-1 Pin ARGB connector drives the lighting. The data does not list a price or release year.
Frequently asked questions
Is the SilverStone Air Blazer 120R ARGB quiet?
SilverStone rates it at up to 35.6 dB(A), which is the maximum noise figure in the data. Because it runs from 600 to 2200 RPM, lowering the speed via the 4-Pin PWM connector should reduce noise, but the data does not list noise at specific RPM points.
What is the Air Blazer 120R ARGB best for?
With 93.97 CFM airflow and 3.53 mmH2O static pressure, it suits both case ventilation and pressure-demanding spots such as radiators, heatsinks or filtered intakes. The high static pressure figure is the key number for restrictive airflow paths.
Does the Air Blazer 120R ARGB fit a standard 120mm mount?
Yes, it is a 120mm diameter fan with a 25mm thickness, so it matches standard 120mm fan mounts. It uses a 4-Pin PWM connector for speed control and a 4-1 Pin ARGB connector for lighting, so your motherboard or controller needs those headers.














