| Model | CL-F079-PL12SW-A |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 500–1500 RPM |
| Max airflow | 56.45 CFM |
| Max pressure | 1.59 mmH₂O |
| Max noise | 25.8 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 2510-4 Pin + 5V RGB Header |
| Lighting | ARGB |
| Colour | Black |
CL-F079-PL12SW-A is a 25 mm thick 120 mm ARGB fan reaching 1500 RPM with 56.45 CFM and 1.59 mmH2O static pressure
More Thermaltake fans · All 120mm models · Browse the full fan database
About the Thermaltake Pure 12 ARGB Sync Radiator Fan TT Premium Edition 3-Fan Pack
The Thermaltake Pure 12 ARGB Sync TT Premium Edition 3-Fan Pack uses 120 mm fans with a 25 mm thickness, so they suit standard 120 mm case and radiator mounts. The 500 to 1500 RPM range gives a low idle speed and a higher top end, while 56.45 CFM airflow and 1.59 mmH2O static pressure point to a balanced fan that can move case air and still push through a radiator. Buyers with dense radiators or restrictive front panels should note the modest static pressure figure rather than expect a pressure-optimised design.
The rated noise is 25.8 dB(A), which is a manufacturer figure at an unspecified speed, so expect louder operation near 1500 RPM. Each fan uses a 2510-4 pin connector plus a 5V RGB header, so the motherboard needs a 5V ARGB header for lighting control. Hydraulic bearings are listed, and the colour is black. The data does not list a price or release year, so check the retailer for current pricing on the three-fan pack.
Frequently asked questions
Is the Thermaltake Pure 12 ARGB Sync 3-Fan Pack quiet?
The manufacturer rates noise at 25.8 dB(A), but the data does not state the speed for that figure. The 500 RPM minimum should allow quieter running, while 1500 RPM will likely be more audible.
Is this fan good for radiators or case airflow?
It lists 56.45 CFM airflow and 1.59 mmH2O static pressure, a balanced specification. It can serve as a case fan or on a radiator, though the static pressure is modest for very dense radiators or restrictive panels.
What connector and RGB header does it need?
Each fan uses a 2510-4 pin connector plus a 5V RGB header. Your motherboard needs a 5V ARGB header for lighting control. The pack contains three 120 mm fans, each 25 mm thick, in black.
More Thermaltake fans
Thermaltake Riing 12 LED RGB Radiator Fan Sync Edition 3-Fan Pack
Thermaltake Pure Plus 12 RGB Radiator Fan TT Premium Edition 3-Fan Pack
Thermaltake Riing Plus 12 RGB Radiator Fan TT Premium Edition 3-Fan Pack
Thermaltake Riing Duo 12 RGB Radiator Fan TT Premium Edition 3-Fan Pack
Thermaltake Riing Quad 12 RGB Radiator Fan TT Premium Edition 3-Fan Pack
Thermaltake Riing Trio 12 RGB Radiator Fan TT Premium Edition 3-Fan Pack









