| Model | TL-C12CW-S |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | –1550 RPM |
| Max airflow | 66.17 CFM |
| Max pressure | 1.53 mmH₂O |
| Max noise | 25.6 dBA |
| Bearing | S-FDB Bearing |
| Connector | 4-pin PWM + 3-pin 5V ARGB |
| Lighting | ARGB |
| Colour | White |
TL-C12CW-S is a white ARGB version of the budget favourite rated up to 1550 rpm with 66.17 CFM
More Thermalright fans · All 120mm models · Browse the full fan database
About the TL-C12CW-S 120mm ARGB Fan
The TL-C12CW-S balances airflow and pressure for a 120mm fan. Its 66.17 CFM airflow suits open case intake and exhaust positions, while 1.53 mmH2O static pressure is modest, so it is a better fit for unobstructed case mounting than for dense radiators or thick dust filters. At 1550 RPM the rated noise is 25.6 dB(A), which gives buyers a clear expectation of the acoustic ceiling at full speed.
Mounting follows the standard 120mm by 25mm format, so it fits common case and cooler positions. The 4-pin PWM connector allows speed control from the motherboard, and the separate 3-pin 5V ARGB connector handles lighting, so the board needs a 5V ARGB header for the LEDs. The S-FDB bearing is the stated bearing type. The data does not list a price or release year, so check the retailer for current pricing.
Frequently asked questions
Is the TL-C12CW-S quiet at full speed?
Thermalright rates it at 25.6 dB(A) at its 1550 RPM maximum. That is the only noise figure in the data, so lower PWM speeds are not separately rated here.
What is the TL-C12CW-S best used for?
With 66.17 CFM airflow and 1.53 mmH2O static pressure, it suits case intake and exhaust. The modest pressure makes it less ideal for dense radiators or restrictive filters.
Does the TL-C12CW-S need a special RGB header?
Yes. It uses a 3-pin 5V ARGB connector for lighting plus a 4-pin PWM connector for fan control, so the motherboard needs a 5V ARGB header to drive the LEDs.















