| Model | TL-C12R-S |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | –1500 RPM |
| Max airflow | 58 CFM |
| Max pressure | 1.53 mmH₂O |
| Max noise | 25.6 dBA |
| Bearing | S-FDB Bearing |
| Connector | 4-pin PWM + 3-pin 5V ARGB |
| Lighting | ARGB |
| Colour | Black |
TL-C12R-S is a reverse blade ARGB model for intake stacks rated up to 1500 rpm with 58 CFM
More Thermalright fans · All 120mm models · Browse the full fan database
About the TL-C12R-S 120mm ARGB Fan
The TL-C12R-S is a 120mm by 25mm ARGB fan rated at 1500 RPM, with 58 CFM of airflow and 1.53 mmH2O of static pressure. That balance suits case ventilation and airflow-focused builds, while the modest static pressure means dense radiators or heavily restricted filters are not its strongest use case. Buyers should match the fan to low-to-moderate restriction rather than assume it is a pressure-optimised model.
Noise is listed at 25.6 dB(A) at maximum speed, so expect the fan to be audible at full 1500 RPM and quieter when PWM control lowers the speed. The S-FDB bearing is the stated bearing type. Mounting uses standard 120mm 25mm-thick spacing, and the connector is 4-pin PWM plus a separate 3-pin 5V ARGB header, so the board needs both. Colour is black. The data does not list a price or release year.
Frequently asked questions
Is the Thermalright TL-C12R-S quiet at full speed?
The manufacturer lists 25.6 dB(A) noise, which is the figure at its 1500 RPM maximum. Expect audible airflow at full speed; PWM control on the 4-pin connector lets you run it slower for less noise.
What is the TL-C12R-S best used for?
With 58 CFM airflow and 1.53 mmH2O static pressure, it suits case ventilation and airflow-focused setups. Its static pressure is modest, so dense radiators or heavily restricted intakes are not its strongest application.
Does the TL-C12R-S need a special RGB header?
Yes. It uses a 4-pin PWM connector for fan power and a separate 3-pin 5V ARGB connector for lighting, so your motherboard or controller must provide a 5V ARGB header alongside the fan header.















