| Model | TL-C12R-L |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | –1500 RPM |
| Max airflow | 58 CFM |
| Max pressure | 1.53 mmH₂O |
| Max noise | 25.6 dBA |
| Bearing | S-FDB Bearing |
| Connector | 4-pin PWM + 4-pin 12V RGB |
| Lighting | RGB |
| Colour | Black |
TL-C12R-L is a reverse blade twelve volt RGB model rated up to 1500 rpm with 58 CFM and 1.53 mmH2O static pressure
More Thermalright fans · All 120mm models · Browse the full fan database
About the TL-C12R-L 120mm RGB Fan
The TL-C12R-L is a 120mm by 25mm fan rated at 1500 RPM, delivering 58 CFM of airflow against 1.53 mmH2O of static pressure. That balance suits case exhaust and intake positions where airflow matters most, while the modest static pressure means dense radiators and thick filters are not its strongest use case. Buyers should treat it as a general-purpose case fan rather than a radiator specialist.
Noise is listed at 25.6 dB(A) at maximum speed, so expect a gentle hum rather than silence at full tilt. The S-FDB bearing is the manufacturer's stated bearing type. Mounting uses standard 120mm 25mm spacing, and the fan connects through a 4-pin PWM header for speed control plus a separate 4-pin 12V RGB connector for lighting. The data does not list a price or release year, so confirm those with the retailer.
Frequently asked questions
Is the Thermalright TL-C12R-L quiet at full speed?
Thermalright rates the TL-C12R-L at 25.6 dB(A) at its 1500 RPM maximum. That is the manufacturer figure for full speed, and PWM control lets you run it slower, though the data does not list noise at reduced speeds.
Is the TL-C12R-L good for a radiator or a case?
Its 58 CFM airflow and 1.53 mmH2O static pressure point to case intake and exhaust use. Static pressure is modest, so the data does not support treating it as a high-pressure radiator fan for dense fin stacks.
What connectors and size does the TL-C12R-L need?
It is a 120mm fan with 25mm thickness, so it fits standard 120mm mounts. It uses a 4-pin PWM connector for fan control and a separate 4-pin 12V RGB connector for the RGB lighting.















