| Model | TL-C12L |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | –1500 RPM |
| Max airflow | 66.17 CFM |
| Max pressure | 1.53 mmH₂O |
| Max noise | 25.6 dBA |
| Bearing | S-FDB Bearing |
| Connector | 4-pin PWM + 4-pin 12V RGB |
| Lighting | RGB |
| Colour | Black |
TL-C12L is a twelve volt RGB kit with fourteen modes rated up to 1500 rpm with 66.17 CFM and 1.53 mmH2O static pressure
More Thermalright fans · All 120mm models · Browse the full fan database
About the TL-C12L 120mm RGB Fan
The TL-C12L 120mm RGB balances airflow and pressure for a 25 mm thick 120 mm fan. Its 66.17 CFM rating suits open case intake and exhaust positions where volume matters, while 1.53 mmH2O static pressure is modest, so it is a better fit for unobstructed case airflow than for dense radiators or thick heatsinks. At a maximum of 1500 RPM the rated noise is 25.6 dB(A), which gives you a reference point for how loud it may run at full speed; the data does not list a minimum RPM or a noise figure at lower speeds.
Mounting follows standard 120 mm spacing at 25 mm thickness, so it fits common case and cooler positions. The 4-pin PWM connector allows speed control from a motherboard header, and the separate 4-pin 12V RGB connector requires an RGB header or controller for lighting. The S-FDB bearing is the stated bearing type, and the fan is black with RGB lighting. The data does not list a price or release year, so check the retailer listing for current pricing.
Frequently asked questions
Is the Thermalright TL-C12L 120mm RGB quiet at 1500 RPM?
The manufacturer rates it at 25.6 dB(A) at its 1500 RPM maximum. The data does not list noise at lower PWM speeds, so actual quietness depends on the speed you set through the 4-pin PWM connector.
Is the TL-C12L 120mm RGB best for radiators or case airflow?
With 66.17 CFM airflow and 1.53 mmH2O static pressure, it is better suited to case intake and exhaust than to dense radiators or thick heatsinks, where higher pressure fans are usually preferred.
What connectors does the TL-C12L 120mm RGB need?
It uses a 4-pin PWM connector for fan power and speed control plus a separate 4-pin 12V RGB connector for lighting. Your motherboard or controller must have a matching 12V RGB header.















