| Model | CL-F081-PL20SW-A |
|---|---|
| Size | 200 mm |
| Thickness | 30 mm |
| Speed range | 500–1000 RPM |
| Max airflow | 129.54 CFM |
| Max pressure | 1.72 mmH₂O |
| Max noise | 31.2 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 2510-4 Pin + 5V RGB Header |
| Lighting | ARGB |
| Colour | Black |
CL-F081-PL20SW-A is a 30 mm thick 200 mm ARGB fan reaching 1000 RPM with 129.54 CFM and 1.72 mmH2O static pressure
More Thermaltake fans · All 200mm models · Browse the full fan database
About the Thermaltake Pure 20 ARGB Sync Case Fan TT Premium Edition
The Thermaltake Pure 20 ARGB Sync Case Fan TT Premium Edition (CL-F081-PL20SW-A) is a 200 mm fan with 30 mm thickness, so it suits large case mounts rather than standard 120 mm or 140 mm positions. Its 129.54 CFM airflow at up to 1000 RPM points to high-volume case ventilation, while the 1.72 mmH2O static pressure is modest, so it is better for open airflow paths than for pushing through dense radiators or filters. At 500 RPM minimum it can run slowly, and the rated 31.2 dB(A) is the manufacturer figure at its top speed.
The hydraulic bearing is listed for longer life, and the 2510-4 pin plus 5V RGB header means you need a compatible ARGB connection on your motherboard or controller. Colour is black. The data does not list a price, release year, warranty or MTBF, so confirm those with the retailer. Check that your case supports a 200 mm by 30 mm fan before ordering.
Frequently asked questions
Is the Thermaltake Pure 20 ARGB Sync quiet?
Thermaltake rates this fan at 31.2 dB(A), which is the manufacturer figure at its maximum 1000 RPM. The 500 RPM minimum speed gives you a lower-speed option, but the data does not list noise levels at reduced RPM.
What is the Thermaltake Pure 20 ARGB Sync best for?
With 129.54 CFM airflow and 1.72 mmH2O static pressure, it suits large case ventilation and open airflow paths. The low static pressure makes it less suited to dense radiators or restrictive filters, based on the listed figures.
What size case does the Pure 20 ARGB Sync fit?
It is a 200 mm fan that is 30 mm thick, so your case must have a 200 mm mounting position with clearance for the extra depth. It will not fit standard 120 mm or 140 mm fan mounts.















