| Model | MFL-B2DN-18NPA-R1 |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 650–1800 RPM |
| Max airflow | 47.2 CFM |
| Max pressure | 1.6 mmH₂O |
| Max noise | 30 dBA |
| Bearing | Rifle Bearing |
| Connector | 4-Pin PWM |
| Lighting | ARGB |
Cooler Master MasterFan MF120 Halo ARGB 120mm delivers 47.2 CFM at up to 1800 RPM with 30 dBA noise on a 25 mm frame.
More Cooler Master fans · All 120mm models · Browse the full fan database
About the Cooler Master MasterFan MF120 Halo ARGB 120mm
The MasterFan MF120 Halo ARGB runs from 650 to 1800 RPM and moves 47.2 CFM at 1.6 mmH2O of static pressure. That balance suits case airflow and light restriction such as a mesh front or a slim radiator, while dense radiators or thick dust filters favor fans with higher pressure. Cooler Master rates noise at 30 dB(A), so expect audible airflow near the 1800 RPM ceiling and quieter operation toward the 650 RPM floor.
The 120mm diameter and 25mm thickness fit standard 120mm case and cooler mounts, and the 4-pin PWM connector lets a motherboard header control speed. ARGB lighting requires an ARGB header or compatible controller; the data does not list a controller in the box. The rifle bearing is the stated bearing type. The data does not list a price or release year, so confirm current pricing and included accessories with the retailer before ordering.
Frequently asked questions
Is the Cooler Master MasterFan MF120 Halo ARGB quiet?
Cooler Master rates it at 30 dB(A) at its 1800 RPM maximum. Because it supports PWM control from 650 to 1800 RPM, you can lower the speed for less noise, though the data does not list noise at lower speeds.
What is the MasterFan MF120 Halo ARGB best for?
With 47.2 CFM and 1.6 mmH2O static pressure, it suits case airflow and lightly restricted mounts like mesh fronts or slim radiators. Dense radiators and thick filters generally favor higher static pressure than the listed 1.6 mmH2O.
Does the MF120 Halo ARGB fit a standard 120mm mount and need a special header?
It measures 120mm in diameter and 25mm thick, so it fits standard 120mm case and cooler mounts. It uses a 4-pin PWM connector for fan speed and ARGB lighting, which needs an ARGB header or compatible controller; the data does not list one in the box.















