| Model | R4-140R-15PC-R1 |
|---|---|
| Size | 140 mm |
| Thickness | 25 mm |
| Speed range | 650–1500 RPM |
| Max airflow | 90 CFM |
| Max pressure | 1.6 mmH₂O |
| Max noise | 33.5 dBA |
| Bearing | Rifle Bearing |
| Connector | 4-Pin PWM |
| Lighting | ARGB |
Cooler Master MasterFan MF140R ARGB delivers 90 CFM at up to 1500 RPM with 33.5 dBA noise on a 25 mm frame.
More Cooler Master fans · All 140mm models · Browse the full fan database
About the Cooler Master MasterFan MF140R ARGB
The MasterFan MF140R ARGB is a 140mm, 25mm-thick fan built around a 650–1500 RPM range. Its 90 CFM airflow figure is high for a 140mm fan, which suits case ventilation and open-air intake or exhaust positions where moving large volumes of air matters more than pushing through dense fins. The 1.6 mmH2O static pressure is modest, so it is not the obvious pick for radiators or tightly packed heatsinks; the data does not list a radiator-specific rating.
Noise is rated at 33.5 dB(A), which is meaningful at the top of the 1500 RPM range, so expect the fan to be audible when running at full speed and quieter toward the 650 RPM floor. It uses a Rifle Bearing and a 4-pin PWM connector, so speed control depends on a PWM-capable header on your board or controller. ARGB lighting is included. The data does not list a price or release year.
Frequently asked questions
Is the Cooler Master MasterFan MF140R ARGB quiet?
Cooler Master rates it at 33.5 dB(A), which is the figure at its 1500 RPM maximum. The fan can run as low as 650 RPM via its 4-pin PWM connector, so you can trade airflow for lower noise depending on your fan curve.
Is the MF140R ARGB good for a radiator or CPU cooler?
Its 1.6 mmH2O static pressure is modest, while airflow is high at 90 CFM. That balance favors case ventilation and open airflow positions rather than dense radiator fins. The manufacturer data does not list a specific radiator or heatsink rating.
Will a 140mm MasterFan MF140R ARGB fit my case?
It measures 140mm in diameter and 25mm thick, so it fits standard 140mm fan mounts with 25mm clearance. Check that your case or cooler accepts 140mm fans and that you have a 4-pin PWM header for speed control.















