| Model | MFX-B2DN-25NP2-R2 |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 690–2500 RPM |
| Max airflow | 70.7 CFM |
| Max pressure | 3.61 mmH₂O |
| Max noise | 32.8 dBA |
| Bearing | Loop Dynamic Bearing |
| Connector | 4-Pin PWM |
| Lighting | ARGB |
| Colour | Black |
Cooler Master SickleFlow Edge 120 ARGB delivers 70.7 CFM at up to 2500 RPM with 32.8 dBA noise on a 25 mm frame.
More Cooler Master fans · All 120mm models · Browse the full fan database
About the Cooler Master SickleFlow Edge 120 ARGB
The SickleFlow Edge 120 ARGB balances airflow and pressure for a 25mm-thick 120mm fan. Its 70.7 CFM airflow suits open case ventilation and rear or top exhaust, while the 3.61 mmH2O static pressure gives it enough push for heatsinks and radiators where resistance is higher. At 2500 RPM maximum it moves a lot of air, and the 32.8 dB(A) rating describes that top-end operation, so expect the fan to be audible when pushed hard and quieter near its 690 RPM minimum.
Mounting is standard: 120mm diameter, 25mm thickness, and a 4-Pin PWM connector for motherboard speed control. ARGB lighting is included in a black frame, and the Loop Dynamic Bearing is the stated bearing type. The manufacturer data does not list a price or release year, so check the retailer for current pricing. Confirm your header supports PWM and ARGB before buying.
Frequently asked questions
Is the Cooler Master SickleFlow Edge 120 ARGB quiet?
The listed noise rating is 32.8 dB(A), which applies at its 2500 RPM maximum. With PWM control down to a 690 RPM minimum, you can run it slower, but the data does not list noise at lower speeds.
Is this fan better for a case or a radiator?
It offers both 70.7 CFM airflow and 3.61 mmH2O static pressure. The pressure figure makes it usable on heatsinks and radiators, while the airflow suits case ventilation. The data does not rank it for either use.
What connector and lighting does it use, and does it fit a 120mm mount?
It uses a 4-Pin PWM connector and ARGB lighting. It is a 120mm fan with 25mm thickness, so it fits standard 120mm case and cooler mounts. Check that your board has PWM and ARGB headers.














