| Model | MFL-B4DN-15NPA-R1 |
|---|---|
| Size | 140 mm |
| Thickness | 25 mm |
| Speed range | 650–1500 RPM |
| Max airflow | 55 CFM |
| Max pressure | 1.17 mmH₂O |
| Max noise | 30 dBA |
| Bearing | Rifle Bearing |
| Connector | 4-Pin PWM |
| Lighting | ARGB |
Cooler Master MasterFan MF140 Halo ARGB 140mm delivers 55 CFM at up to 1500 RPM with 30 dBA noise on a 25 mm frame.
More Cooler Master fans · All 140mm models · Browse the full fan database
About the Cooler Master MasterFan MF140 Halo ARGB 140mm
The MasterFan MF140 Halo ARGB is a 140mm, 25mm-thick fan with a 650–1500 RPM PWM range, 55 CFM airflow and 1.17 mmH2O static pressure. That balance suits case intake and exhaust and light-restriction heatsinks or radiators better than dense, high-fin stacks, where higher static pressure is usually preferred. At its 30 dB(A) rating, expect audible airflow near the 1500 RPM ceiling and quieter operation toward the 650 RPM floor.
Mounting follows standard 140mm spacing at 25mm thickness, and the 4-pin PWM connector lets a motherboard control speed across the full range. ARGB lighting is listed, though the data does not specify the LED count or included controller. The rifle bearing is the stated bearing type. Price and release year are not listed in the supplied data, so check the retailer for current pricing.
Frequently asked questions
Is the Cooler Master MF140 Halo ARGB quiet?
Cooler Master rates it at 30 dB(A), with a 650 RPM minimum and 1500 RPM maximum. Expect the lowest noise near 650 RPM and the most airflow and sound at 1500 RPM. Actual noise depends on your case and fan curve.
Is the MF140 Halo ARGB good for a radiator or case airflow?
It lists 55 CFM airflow and 1.17 mmH2O static pressure, which favors case intake and exhaust and light-restriction cooling setups. Dense radiators or heatsinks generally benefit from higher static pressure, so compare that figure before choosing it for those uses.
What size and connector does the MF140 Halo ARGB use?
It is a 140mm fan with 25mm thickness, so it fits standard 140mm mounting positions. It uses a 4-pin PWM connector for motherboard speed control and includes ARGB lighting, though the data does not list an LED count or controller.















