| Model | MFZ-M4DN-19NP2-R1 |
|---|---|
| Size | 140 mm |
| Thickness | 25 mm |
| Speed range | –1900 RPM |
| Max airflow | 76.5 CFM |
| Max pressure | 2.3 mmH₂O |
| Max noise | 30 dBA |
| Bearing | Loop Dynamic Bearing |
| Connector | 4-Pin PWM |
| Lighting | ARGB |
| Colour | Black |
Cooler Master Mobius 140P ARGB delivers 76.5 CFM at up to 1900 RPM with 30 dBA noise on a 25 mm frame.
More Cooler Master fans · All 140mm models · Browse the full fan database
About the Cooler Master Mobius 140P ARGB
The Mobius 140P ARGB is a 140mm, 25mm-thick fan rated to 1900 RPM, pushing 76.5 CFM at 2.3 mmH2O static pressure. That balance suits both open case airflow and moderately restrictive heatsinks or radiators, though buyers mounting it on dense fins should weigh the 2.3 mmH2O figure against higher-pressure designs. At full speed Cooler Master rates it at 30 dB(A), so expect audible airflow at 1900 RPM and quieter running when PWM lowers the speed.
Mounting is standard 140mm with a 25mm frame, and the 4-Pin PWM connector lets a motherboard control speed. The Loop Dynamic Bearing is the stated bearing type, and ARGB lighting is included in the black frame. The data does not list a price, release year, warranty or included accessories, so confirm those with the retailer. Check that your case or cooler accepts 140mm fans and that your board has an ARGB header for the lighting.
Frequently asked questions
Is the Cooler Master Mobius 140P ARGB quiet?
Cooler Master rates it at 30 dB(A) at its 1900 RPM maximum. That is an audible level at full speed, but 4-Pin PWM control lets the motherboard reduce RPM for quieter everyday running. The data does not list a minimum noise figure.
What is the Mobius 140P ARGB best used for?
With 76.5 CFM airflow and 2.3 mmH2O static pressure, it suits case intake and exhaust as well as moderately restrictive heatsinks and radiators. For very dense fin stacks, compare its 2.3 mmH2O rating with higher-pressure fans before deciding.
Will this 140mm fan fit my case and motherboard?
It measures 140mm across with a 25mm thickness, so your case or cooler must accept standard 140mm fans. It uses a 4-Pin PWM connector for speed control, and the ARGB lighting needs a compatible addressable RGB header on your motherboard.















