| Model | 12CL1F1W |
|---|---|
| Size | 120 mm |
| Thickness | 28 mm |
| Speed range | –2100 RPM |
| Max airflow | 77.34 CFM |
| Max pressure | 2.52 mmH₂O |
| Max noise | 29.8 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-Pin PWM + 5V 3-Pin ARGB |
| Lighting | ARGB |
| Colour | White |
UNI FAN CL FLEX 120 pairs a 28 mm frame with dual zone RGB and 2100 RPM for 77.34 CFM
More Lian Li fans · All 120mm models · Browse the full fan database
About the Lian Li UNI FAN CL FLEX 120 White
The Lian Li UNI FAN CL FLEX 120 White is a 120mm fan with a 28mm frame, slightly thicker than standard 25mm models, so check clearance at your mounting points. Its 2100 RPM maximum produces 77.34 CFM of airflow and 2.52 mmH2O of static pressure, a balance that suits both open case ventilation and resistance from radiators or dense filters. Buyers pushing through heatsinks should value the static pressure figure, while those prioritizing raw exhaust flow can look at the CFM rating.
Noise is rated at 29.8 dB(A) at maximum speed, so expect the fan to be audible when run flat out and quieter at reduced PWM duty. The Fluid Dynamic Bearing is listed for long-term use. It connects via 4-Pin PWM for speed control plus 5V 3-Pin ARGB for lighting, so your motherboard or controller needs both headers. The data does not list a price or release year.
Frequently asked questions
Is the Lian Li UNI FAN CL FLEX 120 White quiet?
Lian Li rates it at 29.8 dB(A) at its 2100 RPM maximum. That is the only noise figure in the data, so lower PWM speeds are not separately specified. Expect maximum-speed operation to be audible.
What is the Lian Li UNI FAN CL FLEX 120 White best for?
With 77.34 CFM airflow and 2.52 mmH2O static pressure, it suits both case ventilation and pressure-resistant setups such as radiators or filtered intakes. The 28mm thickness means you should confirm clearance before mounting.
What connectors does the Lian Li UNI FAN CL FLEX 120 White need?
It uses a 4-Pin PWM connector for fan speed control and a separate 5V 3-Pin ARGB connector for the lighting. Your motherboard or controller must provide both headers for full fan and ARGB functionality.















