| Model | R-FD12RARGBV2-BKAPN1-G |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 500–1700 RPM |
| Max airflow | 50.56 CFM |
| Max pressure | 1.18 mmH₂O |
| Max noise | 26.07 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | Black |
DeepCool FD12R ARGB V2 is a 120 mm 25 mm fan rated 500-1700 RPM with 50.56 CFM and 1.18 mmH2O at 26.07 dBA
More DeepCool fans · All 120mm models · Browse the full fan database
About the DeepCool FD12R ARGB V2 120mm Reverse ARGB Fan
The FD12R ARGB V2 is a 120 mm, 25 mm thick reverse-blade fan running from 500 to 1700 RPM. Its 50.56 CFM airflow against 1.18 mmH2O static pressure marks it as an airflow-first design, so it suits case intake and exhaust positions better than dense radiators or heavily restricted filters, where higher pressure fans are usually preferred. At full speed DeepCool rates noise at 26.07 dB(A); the 500 RPM floor gives you a slower, quieter option for idle loads, though the data does not list a minimum noise figure.
Mounting is standard 120 mm with 25 mm thickness, so clearances are typical for the size. A 4-pin PWM header controls speed, and a separate 3-pin ARGB connector handles lighting, so your board or controller needs both. The hydraulic bearing is rated for the usual long-life use, but the data does not list an MTBF or warranty. Colour is black, and the data does not list a price or release year.
Frequently asked questions
Is the DeepCool FD12R ARGB V2 120mm Reverse quiet?
DeepCool rates it at 26.07 dB(A) at its 1700 RPM maximum. The 500 RPM minimum lets you run it slower, but the data does not list a noise figure for lower speeds, so treat 26.07 dB(A) as the published ceiling.
What is the FD12R ARGB V2 best used for?
With 50.56 CFM and 1.18 mmH2O, it is an airflow-oriented fan. Case intake and exhaust mounting suits those numbers best; for dense radiators or restrictive filters, fans with higher static pressure are usually the better fit.
What connectors does the FD12R ARGB V2 need?
It uses a 4-pin PWM connector for fan speed and a separate 3-pin ARGB connector for lighting. Your motherboard or ARGB controller must provide both, and the 120 mm size with 25 mm thickness fits standard 120 mm mounting.















