| Model | R-FL12-BKAPN1-G |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 500–2150 RPM |
| Max airflow | 55 CFM |
| Max pressure | 2.82 mmH₂O |
| Max noise | 32 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | Black |
DeepCool FL12 is a 120 mm 25 mm fan rated 500-2150 RPM with 55 CFM and 2.82 mmH2O at 32 dBA
More DeepCool fans · All 120mm models · Browse the full fan database
About the DeepCool FL12 120mm ARGB Fan
The DeepCool FL12 120mm ARGB balances airflow and pressure for a 25mm-thick 120mm frame. Its 55 CFM airflow suits case intake and exhaust, while the 2.82 mmH2O static pressure figure is the more useful number for pushing air through dense heatsink fins or a radiator. The 500–2150 RPM PWM range lets the fan idle slowly and ramp up under load, and the rated maximum noise is 32 dB(A), so expect the loudest point at full speed rather than at low RPM.
Mounting follows standard 120mm spacing at 25mm thickness, so it fits common case and cooler positions. The 4-pin PWM connector handles speed control, and the separate 3-pin ARGB connector drives the lighting, meaning your motherboard or controller needs an ARGB header. The Fluid Dynamic Bearing is the stated bearing type. Colour is black. The data does not list a price or release year, so check the retailer for current pricing.
Frequently asked questions
Is the DeepCool FL12 120mm ARGB quiet?
Its rated maximum noise is 32 dB(A) at up to 2150 RPM. Because it uses 4-pin PWM and starts at 500 RPM, you can run it slower for less noise, but the data lists no lower-speed noise figure.
Is the FL12 ARGB better for a case or a radiator?
It offers 55 CFM airflow and 2.82 mmH2O static pressure. The pressure figure makes it a reasonable candidate for radiators and dense heatsinks, while the airflow suits standard case intake and exhaust positions.
What connectors and size does the DeepCool FL12 need?
It is a 120mm fan with 25mm thickness, a 4-pin PWM connector for speed control and a separate 3-pin ARGB connector for lighting. Your motherboard or controller must have a 3-pin ARGB header.















