| Model | R-FD14-BKAPN1-G |
|---|---|
| Size | 140 mm |
| Thickness | 25 mm |
| Speed range | 400–1650 RPM |
| Max airflow | 82.53 CFM |
| Max pressure | 1.96 mmH₂O |
| Max noise | 25.2 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | Black |
DeepCool FD14 ARGB is a 140 mm 25 mm fan rated 400-1650 RPM with 82.53 CFM and 1.96 mmH2O at 25.2 dBA
More DeepCool fans · All 140mm models · Browse the full fan database
About the DeepCool FD14 ARGB 140mm ARGB Fan
The DeepCool FD14 ARGB 140mm balances strong airflow with moderate static pressure, so it suits open case panels and low-restriction mesh intakes better than dense radiators or thick dust filters. Its 82.53 CFM airflow figure is the headline number, while 1.96 mmH2O static pressure is modest, meaning buyers pushing air through tight fins should expect less from it than from a high-pressure design. The 400–1650 RPM range lets you tune it down for near-silent idle use or run it at full speed when heat rises.
Noise is rated at 25.2 dB(A), which is a manufacturer figure and not a measured room result. The 25 mm thickness and 140 mm frame fit standard 140 mm mounts, and the 4-pin PWM plus 3-pin ARGB connectors require a PWM header and an ARGB header on the motherboard or controller. The hydraulic bearing is listed for longer service life, though the data does not list an MTBF figure, warranty length, price or release year.
Frequently asked questions
Is the DeepCool FD14 ARGB 140mm quiet?
DeepCool rates it at 25.2 dB(A) with a 400–1650 RPM range, so it can be slowed for quieter operation. That is a manufacturer rating, not a measured test result, and actual noise depends on speed and installation.
Is this fan better for case airflow or radiators?
Its 82.53 CFM airflow is high while 1.96 mmH2O static pressure is modest, so it is better suited to case airflow through mesh and open panels than to dense radiator fins or restrictive filters.
What connectors and size does the FD14 ARGB need?
It is a 140 mm fan with 25 mm thickness, using a 4-pin PWM connector for fan control and a separate 3-pin ARGB connector for lighting. Your motherboard or controller needs both headers.
More DeepCool fans
Other 140mm fans
DeepCool FL14 WH 140mm ARGB Fan White
DeepCool FL14 140mm ARGB Fan
Corsair iCUE LINK LX140 RGB 140mm PWM Twin Starter Kit (Black)
Corsair iCUE LINK LX140 RGB 140mm PWM Starter Kit (White)
Corsair iCUE LINK LX140 RGB 140mm PWM Single Fan Expansion (Black)
Corsair iCUE LINK LX140 RGB 140mm PWM Single Fan Expansion (White)









