| Model | R-FD12ARGBV2-BKAPN1-G |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 500–1900 RPM |
| Max airflow | 56.31 CFM |
| Max pressure | 1.48 mmH₂O |
| Max noise | 26.57 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | Black |
DeepCool FD12 ARGB V2 is a 120 mm 25 mm fan rated 500-1900 RPM with 56.31 CFM and 1.48 mmH2O at 26.57 dBA
More DeepCool fans · All 120mm models · Browse the full fan database
About the DeepCool FD12 ARGB V2 120mm ARGB Fan
The DeepCool FD12 ARGB V2 120mm balances airflow and pressure for a 25 mm thick case fan. Its 56.31 CFM airflow suits open case ventilation and rear or top exhaust, while the 1.48 mmH2O static pressure is modest, so buyers mounting it on dense radiators or thick dust filters should expect it to be better suited to low-restriction positions. The 500 to 1900 RPM range lets you tune speed through 4-pin PWM control.
Noise is rated at 26.57 dB(A) at the top end, so expect the fan to be audible near 1900 RPM and quieter when PWM lowers the speed. The hydraulic bearing is listed for the fan, and the 3-pin ARGB connector requires an ARGB header or controller for lighting. The 120 mm diameter and 25 mm thickness fit standard 120 mm mounts. The data does not list a price or release year.
Frequently asked questions
Is the DeepCool FD12 ARGB V2 120mm quiet?
DeepCool rates it at 26.57 dB(A), with a 500 to 1900 RPM range. That figure is the listed noise rating at the fan's operating range, so expect audible airflow near maximum speed and quieter operation at lower PWM settings.
Is this fan best for a radiator or case airflow?
It lists 56.31 CFM airflow and 1.48 mmH2O static pressure. The higher airflow figure and modest pressure suit case intake and exhaust, while dense radiators or restrictive filters may favor a fan with higher static pressure.
Does the FD12 ARGB V2 fit a standard 120mm mount and motherboard?
It is a 120 mm fan with 25 mm thickness, so it fits standard 120 mm case and cooler mounts. It uses a 4-pin PWM connector for speed control plus a separate 3-pin ARGB connector that needs an ARGB header or controller.















