| Model | R-FD12-BKNPN1-G |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 400–2050 RPM |
| Max airflow | 64.2 CFM |
| Max pressure | 2.49 mmH₂O |
| Max noise | 27.6 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-pin PWM Daisy-chain 8-pin |
| Lighting | None |
| Colour | Black |
DeepCool FD12 is a 120 mm 25 mm fan rated 400-2050 RPM with 64.2 CFM and 2.49 mmH2O at 27.6 dBA
More DeepCool fans · All 120mm models · Browse the full fan database
About the DeepCool FD12 120mm PWM Fan
The DeepCool FD12 120mm PWM balances airflow and pressure better than most budget fans. Its 64.2 CFM airflow suits open case ventilation and rear exhaust, while 2.49 mmH2O static pressure gives it enough push for heatsinks and mesh-front intakes. The 400 to 2050 RPM range lets you idle quietly and ramp up under load, with a rated noise ceiling of 27.6 dB(A) at full speed.
The 120mm diameter and 25mm thickness fit standard case and cooler mounts. A 4-pin PWM daisy-chain 8-pin connector lets several fans share one header, which simplifies cable routing. The hydraulic bearing is rated for long service, though the data does not list an MTBF figure or warranty length. There is no lighting, so it suits black, non-RGB builds. The data does not list a price or release year, so check current retail listings for cost.
Frequently asked questions
Is the DeepCool FD12 120mm PWM quiet?
DeepCool rates it at 27.6 dB(A) at its 2050 RPM maximum. At lower speeds within its 400 to 2050 RPM range, noise should drop, though the data does not list noise figures for specific RPM points.
Is the FD12 better for airflow or static pressure?
It offers both: 64.2 CFM airflow and 2.49 mmH2O static pressure. That makes it usable as a case fan or on a heatsink and mesh intake, where pressure matters more than raw airflow.
Does the DeepCool FD12 have RGB lighting?
No. The data lists lighting as none, and the fan is black. If you want illumination, this model is not the right choice; it is aimed at plain black builds.















