| Size | 140 mm |
|---|---|
| Thickness | 25 mm |
| Speed range | 500–1700 RPM |
| Max airflow | 66.59 CFM |
| Max pressure | 2.37 mmH₂O |
| Max noise | 31.46 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | White |
DeepCool FL14 WH is a 140 mm 25 mm fan rated 500-1700 RPM with 66.59 CFM and 2.37 mmH2O at 31.46 dBA
More DeepCool fans · All 140mm models · Browse the full fan database
About the DeepCool FL14 WH 140mm ARGB Fan White
The FL14 WH pairs a 140mm diameter with a 25mm thickness, so it fits standard 140mm case and radiator mounts. Its 500–1700 RPM range covers low-speed idle running and higher-speed load use, while the listed 66.59 CFM airflow and 2.37 mmH2O static pressure suggest a balanced profile rather than a pressure-only design. Buyers pushing air through open case space get useful airflow, and the static pressure figure is worth noting for restrictive filters or radiator fins.
Noise is rated at 31.46 dB(A), which is the manufacturer figure at its operating point rather than a measured review result. The Fluid Dynamic Bearing is listed for the fan, and the 4-pin PWM connector handles speed control while the separate 3-pin ARGB header drives the white ARGB lighting. Check that your motherboard or controller has both headers before mounting. The data does not list a price or release year, so confirm those with the retailer.
Frequently asked questions
Is the DeepCool FL14 WH quiet enough for a low-noise build?
The manufacturer lists 31.46 dB(A) as the noise figure, with a 500 RPM minimum speed for slower running. The data does not include measured noise at each speed, so treat 31.46 dB(A) as the published rating only.
What is the FL14 WH best used for?
With 66.59 CFM airflow and 2.37 mmH2O static pressure, it suits general case airflow and moderately restrictive setups such as filters or radiator fins. The 140mm size and 25mm thickness fit standard 140mm mounts.
Does the DeepCool FL14 WH need a special RGB header?
Yes, it uses a 4-pin PWM connector for fan speed and a separate 3-pin ARGB connector for lighting. Your motherboard or ARGB controller needs both headers, and the fan is listed in white with ARGB lighting.















