| Size | 140 mm |
|---|---|
| Thickness | 25 mm |
| Speed range | 400–1650 RPM |
| Max airflow | 82.53 CFM |
| Max pressure | 1.96 mmH₂O |
| Max noise | 25.2 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | White |
DeepCool FD14 ARGB WH is a 140 mm 25 mm fan rated 400-1650 RPM with 82.53 CFM and 1.96 mmH2O at 25.2 dBA
More DeepCool fans · All 140mm models · Browse the full fan database
About the DeepCool FD14 ARGB WH 140mm ARGB Fan White
The FD14 ARGB WH is a 140mm, 25mm-thick fan running from 400 to 1650 RPM. Its 82.53 CFM airflow figure points to case ventilation and low-restriction intake or exhaust duty, while the 1.96 mmH2O static pressure is modest, so it is better suited to open airflow paths than to dense radiators or heavily obstructed filters. Buyers should match the fan to the restriction of the mount rather than assume one fan covers every position.
At 25.2 dB(A) maximum, the noise figure is moderate for a 140mm fan at 1650 RPM, and the 400 RPM floor allows low-speed operation. The hydraulic bearing is listed, and the 4-pin PWM connector allows speed control from a motherboard header. ARGB lighting uses a separate 3-pin ARGB connector, so both a PWM header and an ARGB header are needed for full function. The data does not list a price or release year.
Frequently asked questions
Is the DeepCool FD14 ARGB WH quiet?
DeepCool lists a maximum noise of 25.2 dB(A) at up to 1650 RPM. The fan also starts as low as 400 RPM, so lower speeds should reduce noise further, though the data does not give a separate noise figure for that range.
Is this fan better for case airflow or a radiator?
The listed 82.53 CFM airflow is high relative to its 1.96 mmH2O static pressure, which suggests case ventilation and low-restriction mounts. The data does not provide radiator or heatsink performance figures, so dense cooling hardware is not confirmed as a best use.
What connectors does the FD14 ARGB WH need?
It uses a 4-pin PWM connector for fan power and speed control plus a separate 3-pin ARGB connector for lighting. Your motherboard or controller therefore needs both a PWM fan header and an ARGB header for the fan and lighting to work.
More DeepCool fans
Other 140mm fans
DeepCool FL14 WH 140mm ARGB Fan White
Corsair iCUE LINK LX140 RGB 140mm PWM Twin Starter Kit (Black)
DeepCool FL14 140mm ARGB Fan
Corsair iCUE LINK LX140 RGB 140mm PWM Starter Kit (White)
Corsair iCUE LINK LX140 RGB 140mm PWM Single Fan Expansion (Black)
Corsair iCUE LINK LX140 RGB 140mm PWM Single Fan Expansion (White)









