| Model | R-FL14-BKAPN1-G |
|---|---|
| Size | 140 mm |
| Thickness | 25 mm |
| Speed range | 500–1700 RPM |
| Max airflow | 66.59 CFM |
| Max pressure | 2.37 mmH₂O |
| Max noise | 31.46 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | Black |
DeepCool FL14 is a 140 mm 25 mm fan rated 500-1700 RPM with 66.59 CFM and 2.37 mmH2O at 31.46 dBA
More DeepCool fans · All 140mm models · Browse the full fan database
About the DeepCool FL14 140mm ARGB Fan
The DeepCool FL14 140mm ARGB is a 140mm by 25mm fan with a 500 to 1700 RPM range, so it can idle quietly or ramp up when load rises. Its 66.59 CFM airflow and 2.37 mmH2O static pressure sit in a balanced middle ground, making it a reasonable pick for case ventilation and for airflow-focused CPU cooler or radiator mounting, though buyers pushing through dense fins or thick radiators should weigh that static pressure figure carefully.
At full speed DeepCool rates the fan at 31.46 dB(A), so expect audible airflow at 1700 RPM and quieter running toward the 500 RPM floor. The fluid dynamic bearing is the durability spec listed. It connects via 4-pin PWM for speed control plus a separate 3-pin ARGB header for lighting, so your board needs both. The data does not list a price or release year.
Frequently asked questions
Is the DeepCool FL14 140mm ARGB quiet?
DeepCool rates it at 31.46 dB(A) at its maximum 1700 RPM. Because the fan starts at 500 RPM, PWM control lets you run it slower and quieter when full airflow is not needed.
What is the FL14 140mm ARGB best used for?
With 66.59 CFM airflow and 2.37 mmH2O static pressure, it suits case ventilation and airflow-oriented cooler or radiator mounting. The data does not specify radiator thickness limits, so check your setup.
Does the FL14 140mm ARGB need two headers?
Yes. It uses a 4-pin PWM connector for fan speed control and a separate 3-pin ARGB connector for the lighting, so your motherboard or controller needs both a PWM fan header and an ARGB header.















