| Model | Wing 12 PL Blue |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 600–1800 RPM |
| Max airflow | 75.6 CFM |
| Max pressure | 2.66 mmH₂O |
| Max noise | 26.8 dBA |
| Connector | 3-pin |
| Lighting | None |
| Colour | Blue |
More GELID Solutions fans · All 120mm models · Browse the full fan database
About the GELID Solutions Wing 12 PL Blue 120mm Fan
The Wing 12 PL Blue is a 120mm by 25mm fan running from 600 to 1800 RPM. Its 75.6 CFM airflow and 2.66 mmH2O static pressure suit both open case ventilation and resistance-heavy spots such as heatsinks or radiators, where pressure matters more than raw airflow. Buyers should treat 26.8 dB(A) as the manufacturer's noise figure at its rated operation, not a measured result in every system.
Mounting follows standard 120mm spacing at 25mm thickness, so it fits common case and cooler positions. The 3-pin connector means speed control depends on the header or controller you use rather than PWM signalling, so confirm your board supports voltage control. The data does not list a price or release year, and there is no lighting; the blue colour refers to the frame.
Frequently asked questions
Is the GELID Solutions Wing 12 PL Blue quiet at 1800 RPM?
The manufacturer lists 26.8 dB(A) as the noise rating, and the fan can run as low as 600 RPM. The data does not provide noise figures for individual speeds, so lower RPM settings should be expected to reduce noise.
Is this fan better for a case or a radiator?
With 2.66 mmH2O static pressure and 75.6 CFM airflow, it is specified for both. The pressure figure makes it a reasonable candidate for heatsinks and radiators, while the airflow suits general case ventilation.
Does the Wing 12 PL Blue have RGB lighting?
No. The data lists lighting as none, and blue refers to the fan colour. It is a 120mm, 25mm-thick fan with a 3-pin connector, so check that your header or controller supports voltage-based speed control.














