| Model | Stella Infinity |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 500–1600 RPM |
| Max airflow | 70 CFM |
| Max noise | 35 dBA |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | Black |
More GELID Solutions fans · All 120mm models · Browse the full fan database
About the GELID Solutions Stella Infinity ARGB 120mm Fan
The GELID Solutions Stella Infinity ARGB 120mm is a 120mm by 25mm fan with a 500 to 1600 RPM range, so it can idle quietly and ramp up under load. Its 70 CFM airflow figure points to a case-ventilation or general airflow role rather than a high-static-pressure radiator fan, since the data lists no static-pressure value. At the top speed the rated noise is 35 dB(A), which is a moderate figure you should expect to hear at full tilt.
Mounting follows the standard 120mm, 25mm-thick format, so it fits common case and cooler positions. It connects by 4-pin PWM for speed control plus a separate 3-pin ARGB header for lighting, meaning your motherboard needs an ARGB header or controller. The frame is black with ARGB lighting. The manufacturer data does not list a price or release year, so check the retailer for current pricing.
Frequently asked questions
Is the GELID Solutions Stella Infinity ARGB 120mm quiet?
The manufacturer rates it at 35 dB(A) at its 1600 RPM maximum. It can run as low as 500 RPM via 4-pin PWM, so lower speeds should reduce noise, but the data lists no noise figure for reduced speeds.
What is the Stella Infinity ARGB 120mm best used for?
With 70 CFM airflow and no listed static-pressure value, it suits case airflow and ventilation. For dense radiators or restrictive filters, the data does not provide a static-pressure figure to confirm performance.
Does the Stella Infinity ARGB 120mm fit my case and motherboard?
It is a standard 120mm fan with 25mm thickness, so it fits common 120mm mounts. It needs a 4-pin PWM header for speed control and a 3-pin ARGB header or controller for the lighting.














