| Model | UNI FAN P28 |
|---|---|
| Size | 120 mm |
| Thickness | 28 mm |
| Speed range | 300–2600 RPM |
| Max airflow | 92 CFM |
| Max pressure | 4.79 mmH₂O |
| Max noise | 32.1 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-pin PWM |
| Lighting | None |
| Colour | Black |
LCP performance fan with a physical three mode switch and a copper shielded FDB motor
More Lian Li fans · All 120mm models · Browse the full fan database
About the Lian Li UNI FAN P28
The Lian Li UNI FAN P28 is a 120mm fan with a 28mm thickness, so it sits slightly deeper than a standard 25mm fan and needs a little extra clearance at the mounting point. Its 92 CFM airflow and 4.79 mmH2O static pressure make it a strong candidate for radiators, heatsinks and mesh-fronted cases where resistance is high, while the 300 to 2600 RPM range lets you dial speed down for everyday use. At full speed Lian Li rates noise at 32.1 dB(A), so expect audible airflow at the top end and quieter running lower in the range.
The fan uses a Fluid Dynamic Bearing and a 4-pin PWM connector for motherboard speed control. Lighting is not included and the colour is black, which suits builds without RGB. The data does not list a price or release year, so check the retailer listing for current pricing. Buyers should confirm 28mm thickness clearance and PWM header availability before ordering.
Frequently asked questions
Is the Lian Li UNI FAN P28 quiet at low RPM?
Lian Li rates the fan at 32.1 dB(A) at its maximum 2600 RPM, and the minimum speed is 300 RPM. The data does not give noise figures for lower speeds, so expect quieter operation below the top end but no specific low-RPM rating.
Is the UNI FAN P28 best for radiators or case airflow?
With 92 CFM airflow and 4.79 mmH2O static pressure, it suits both roles, but the high static pressure makes it especially relevant for radiators, heatsinks and restrictive front panels. Its 28mm thickness means checking clearance first.
Does the Lian Li UNI FAN P28 have RGB lighting?
No. The manufacturer data lists lighting as none and the colour as black. It connects via a 4-pin PWM header for speed control, so you will need a spare PWM header on your motherboard or controller.















