| Model | SWAFAN 240 UNIFY ARGB |
|---|---|
| Size | 120 mm |
| Thickness | 28 mm |
| Speed range | 500–2000 RPM |
| Max airflow | 58.13 CFM |
| Max pressure | 2.85 mmH₂O |
| Max noise | 30 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-pin PWM |
| Lighting | ARGB |
| Colour | Black |
| Released | 2026 |
Single frame 240 mm radiator fan with swappable reverse blades and dual infinity mirrors
More Thermaltake fans · All 120mm models · Browse the full fan database
About the Thermaltake SWAFAN 240 UNIFY ARGB
The SWAFAN 240 UNIFY ARGB is a 120mm fan with a 28mm frame, so it is slightly thicker than a standard 25mm fan and needs a little more clearance at the mounting point. Its 2.85 mmH2O static pressure is the standout figure, which points to radiator and heatsink use where airflow must push through dense fins; the 58.13 CFM airflow still suits open case ventilation. The 500-2000 RPM range via 4-pin PWM lets the fan idle slowly and ramp up under load.
At full speed Thermaltake rates noise at 30 dB(A), so expect an audible but moderate presence at 2000 RPM and quieter running toward the 500 RPM floor. The hydraulic bearing is listed for long-term smoothness, and ARGB lighting is included in the black frame. The data does not list a price, and the release year is 2026. Check your case or radiator clearance for the 28mm thickness before ordering.
Frequently asked questions
Is the Thermaltake SWAFAN 240 UNIFY ARGB quiet?
Thermaltake rates it at 30 dB(A), which is the figure at its 2000 RPM maximum. Because it is a 4-pin PWM fan with a 500 RPM minimum, you can run it slower for less noise, but the data does not list noise at lower speeds.
Is this fan best for a radiator or case airflow?
Its 2.85 mmH2O static pressure is the stronger figure, so it suits radiators and heatsinks where air must pass dense fins. The 58.13 CFM airflow also works for case ventilation, but the pressure rating is the reason to pick it.
What size clearance does the SWAFAN 240 UNIFY ARGB need?
It is a 120mm fan with a 28mm thickness, which is thicker than common 25mm fans. Confirm your case, radiator or cooler has room for the extra depth, and note the 4-pin PWM connector for motherboard fan headers.















