| Model | SWAFAN ULTRA 120 EX RGB |
|---|---|
| Size | 120 mm |
| Thickness | 30 mm |
| Speed range | 500–2000 RPM |
| Max airflow | 68 CFM |
| Max pressure | 3.0 mmH₂O |
| Max noise | 30 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-pin PWM |
| Lighting | ARGB |
| Colour | Black |
| Released | 2026 |
Swappable blade ARGB fan with a 4 inch side LCD and a 2000 RPM ceiling for show builds
More Thermaltake fans · All 120mm models · Browse the full fan database
About the Thermaltake SWAFAN ULTRA 120 EX RGB
The Thermaltake SWAFAN ULTRA 120 EX RGB is a 120mm fan with a 30mm frame, so it is thicker than standard 25mm fans and needs a little more clearance at the mounting point. Its 68 CFM airflow and 3.0 mmH2O static pressure make it a reasonable fit for both case ventilation and resistance-heavy positions such as radiators or dense filters, where pressure matters more than raw airflow. The 500–2000 RPM range via 4-pin PWM lets you tune speed to the workload.
At full speed Thermaltake rates noise at 30 dB(A), so expect audible airflow at 2000 RPM and quieter running toward the 500 RPM floor. The hydraulic bearing is listed for long-term use, and ARGB lighting is included in the black finish. The data does not list a price, so check retailer listings; the release year is given as 2026.
Frequently asked questions
Is the Thermaltake SWAFAN ULTRA 120 EX RGB quiet?
Thermaltake rates it at 30 dB(A) at its maximum 2000 RPM. Because it is PWM controlled down to 500 RPM, you can run it slower for less noise, but the data does not provide noise figures for lower speeds.
Is this fan better for a radiator or case airflow?
It lists 68 CFM airflow and 3.0 mmH2O static pressure, so it suits both roles. The higher pressure figure makes it a sensible choice for radiators and filters, while the airflow figure supports general case ventilation.
What size clearance does the 30mm thickness need?
The fan is 120mm in diameter but 30mm thick, which is deeper than common 25mm fans. Check that your case, radiator or cooler has room for the extra depth before mounting, and confirm a 4-pin PWM header is available.















