| Model | 12RSL1W1W |
|---|---|
| Size | 120 mm |
| Thickness | 28 mm |
| Speed range | –2000 RPM |
| Max airflow | 69.5 CFM |
| Max pressure | 2.6 mmH₂O |
| Max noise | 31 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-Pin PWM |
| Lighting | ARGB |
| Colour | White |
SL Wireless 120 Reverse Blade white combines reversed blades with wireless ARGB and PWM control
More Lian Li fans · All 120mm models · Browse the full fan database
About the Lian Li UNI FAN SL Wireless 120 Reverse Blade White
The Lian Li UNI FAN SL Wireless 120 Reverse Blade White is a 120 mm fan with a 28 mm frame, so check clearance where a standard 25 mm fan sits. Its 69.5 CFM airflow and 2.6 mmH2O static pressure at up to 2000 RPM suit both open case ventilation and resistance such as radiators or filters, with the reverse blade orientation aimed at reversed airflow layouts. Lian Li rates noise at 31 dB(A) at maximum speed, so expect the full figure only near 2000 RPM and lower levels at reduced PWM duty.
A 4-pin PWM connector means speed control from the motherboard or a controller, and the fluid dynamic bearing is the stated bearing type. ARGB lighting is listed, and the white colour is confirmed. The data does not list a price, release year, cable length, or included controller, so confirm those with the retailer. Mounting hardware and daisy-chain details are also not in the supplied data.
Frequently asked questions
Is the Lian Li UNI FAN SL Wireless 120 Reverse Blade White quiet?
Lian Li rates it at 31 dB(A) at its maximum 2000 RPM. That is the only noise figure in the data, so lower PWM speeds should be quieter, but no lower-speed measurements are listed.
What is this reverse blade fan best for?
With 69.5 CFM airflow and 2.6 mmH2O static pressure, it suits case ventilation and resistance like radiators or filters. The reverse blade design targets reversed airflow mounting, though the data does not list specific case or radiator compatibility.
Does it fit a standard 120 mm mount and use PWM?
It is 120 mm in diameter but 28 mm thick, so it needs 3 mm more depth than a 25 mm fan. It uses a 4-pin PWM connector for speed control, and the data does not list cable length or included mounting screws.















