| Model | 12SLLCD1W1W |
|---|---|
| Size | 120 mm |
| Thickness | 28 mm |
| Speed range | –1900 RPM |
| Max airflow | 58.08 CFM |
| Max pressure | 2.4 mmH₂O |
| Max noise | 29.5 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-Pin PWM + 9-Pin USB |
| Lighting | ARGB |
| Colour | White |
UNI FAN SL Wireless LCD 120 combines a 1.6 inch IPS screen with ARGB side strips and cableless sync
More Lian Li fans · All 120mm models · Browse the full fan database
About the Lian Li UNI FAN SL Wireless LCD 120 White
The Lian Li UNI FAN SL Wireless LCD 120 White is a 120mm fan that is 28mm thick, so check clearance where a standard 25mm fan sits. Its 1900 RPM ceiling produces 58.08 CFM of airflow and 2.4 mmH2O of static pressure, a balance that suits case ventilation and light radiator or heatsink resistance rather than dense, high-impedance cooling stacks. The 29.5 dB(A) rating is the manufacturer's figure at its rated operation, so expect a noticeable but moderate sound level near full speed.
A 4-Pin PWM header controls fan speed, while the 9-Pin USB connection supports the fan's ARGB lighting and LCD features, so plan for both a fan header and a USB path. The fluid dynamic bearing is the stated bearing type. The data does not list a price or release year, so confirm those with the retailer. Buyers wanting white ARGB fans with a display should verify motherboard and case support before ordering.
Frequently asked questions
Is the Lian Li UNI FAN SL Wireless LCD 120 White quiet?
Lian Li rates it at 29.5 dB(A) at its maximum 1900 RPM. That is the only noise figure in the data, so lower speeds may be quieter, but the manufacturer does not list a noise curve or minimum-speed rating.
What is this 120mm fan best used for?
With 58.08 CFM airflow and 2.4 mmH2O static pressure, it fits case ventilation and moderately restrictive radiators or heatsinks. It is not a high-static-pressure specialist, so very dense cooling setups may call for a different fan.
Will the 28mm thickness and connectors fit my build?
The fan is 28mm thick rather than the common 25mm, so confirm clearance at the mounting point. It needs a 4-Pin PWM header plus a 9-Pin USB connection for its ARGB and LCD features; the data does not list a price.















