| Model | 12CL1F1B |
|---|---|
| Size | 120 mm |
| Thickness | 28 mm |
| Speed range | –2100 RPM |
| Max airflow | 77.34 CFM |
| Max pressure | 2.52 mmH₂O |
| Max noise | 29.8 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-Pin PWM + 5V 3-Pin ARGB |
| Lighting | ARGB |
| Colour | Black |
UNI FAN CL FLEX 120 pairs a 28 mm frame with dual zone RGB and 2100 RPM for 77.34 CFM
More Lian Li fans · All 120mm models · Browse the full fan database
About the Lian Li UNI FAN CL FLEX 120 Black
The Lian Li UNI FAN CL FLEX 120 Black is a 28mm-thick 120mm fan rated to 2100 RPM, moving 77.34 CFM at 2.52 mmH2O static pressure. That combination of strong airflow and solid pressure suits both open case ventilation and resistance-heavy spots such as radiators or dense dust filters, where thinner low-pressure fans struggle. Noise is listed at 29.8 dB(A) at maximum speed, so expect audible airflow at full tilt and quieter running when PWM lowers the RPM.
Mounting uses standard 120mm spacing, but the extra 28mm thickness means you should confirm clearance behind brackets, top panels or radiator stacks before fitting. The Fluid Dynamic Bearing is specified for the fan hub, and the 4-Pin PWM connector handles speed control while the separate 5V 3-Pin ARGB header drives the lighting, so your motherboard or controller needs both. The data does not list a price or release year, so check the retailer for current pricing.
Frequently asked questions
Is the Lian Li UNI FAN CL FLEX 120 Black quiet?
Lian Li rates it at 29.8 dB(A) at its 2100 RPM maximum. That is the only noise figure in the data, so lower PWM speeds should be quieter, but no lower-speed measurements are listed.
Is this fan better for a radiator or case airflow?
It lists 2.52 mmH2O static pressure and 77.34 CFM airflow, so it can serve either. The pressure figure makes it a reasonable candidate for radiators and filtered intakes, while the airflow suits general case ventilation.
What connectors does the CL FLEX 120 Black need?
It uses a 4-Pin PWM connector for fan speed control plus a separate 5V 3-Pin ARGB connector for the lighting. Your motherboard or ARGB controller must provide both headers for full fan and lighting operation.















