| Size | 140 mm |
|---|---|
| Thickness | 28 mm |
| Speed range | –1800 RPM |
| Max airflow | 101.6 CFM |
| Max pressure | 2.27 mmH₂O |
| Max noise | 31 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 7-Pin to UNI FAN Controller |
| Lighting | ARGB |
| Colour | Black |
UNI FAN TL 140 Reverse Blade keeps 140 mm intake builds looking clean at 101.6 CFM
More Lian Li fans · All 140mm models · Browse the full fan database
About the Lian Li UNI FAN TL 140 Reverse Blade Black
The Lian Li UNI FAN TL 140 Reverse Blade Black is a 140mm, 28mm-thick ARGB fan rated at 1800 RPM. Its 101.6 CFM airflow figure is high for a 140mm fan, which suits open case ventilation and low-restriction intake positions, while the 2.27 mmH2O static pressure is moderate rather than extreme, so it is less aimed at dense radiators or heavily obstructed filters. The reverse-blade design is intended for intake orientation where the frame side faces the viewer.
The 31 dB(A) rating is the manufacturer's noise figure at its rated operation, so expect audible airflow at full 1800 RPM and quieter running at reduced speeds. Mounting uses standard 140mm spacing with a 28mm thickness, so check clearance for thicker frames. The 7-Pin connector requires the UNI FAN Controller, so plan for that hub in your build. The data does not list a price or release year.
Frequently asked questions
Is the Lian Li UNI FAN TL 140 Reverse Blade Black quiet?
Lian Li rates it at 31 dB(A) at up to 1800 RPM. That is the manufacturer's noise figure, so at full speed it will be audible; running the fan at lower speeds should reduce noise. The data does not list noise at other RPM values.
What is the Lian Li UNI FAN TL 140 Reverse Blade Black best for?
With 101.6 CFM airflow and 2.27 mmH2O static pressure, it suits case intake and ventilation where airflow matters more than high restriction. The reverse-blade layout is intended for intake orientation with the frame side facing outward.
Does the Lian Li UNI FAN TL 140 Reverse Blade Black need a special controller?
Yes. It uses a 7-Pin connector to the UNI FAN Controller, so the controller is required for operation and ARGB lighting. Plan for that hub in your build; the data does not list a price or release year.















