| Model | TY-143 |
|---|---|
| Size | 140 mm |
| Thickness | 26.5 mm |
| Speed range | 600–2500 RPM |
| Max airflow | 130 CFM |
| Max noise | 45 dBA |
| Bearing | Dual Ball Bearing |
| Connector | 4-pin PWM |
| Lighting | None |
| Colour | Black |
TY-143 is a legacy high speed 140 mm pressure fan rated up to 2500 rpm with 130 CFM at 45 dBA
More Thermalright fans · All 140mm models · Browse the full fan database
About the TY-143 140mm Non-LED Fan
The TY-143 is a 140mm fan with a 26.5mm frame, so check clearance against standard 25mm mounts before fitting it. Its 600–2500 RPM range and 130 CFM airflow point to a high-static-pressure design suited to heatsinks, radiators and dense mesh intakes rather than silent case ventilation. At the top end the rated noise is 45 dB(A), which is loud; the 600 RPM floor is where quieter running is possible.
The dual ball bearing is a durability-oriented choice, and the 4-pin PWM connector lets a motherboard control speed across the full range. There is no lighting, and the colour is black. The data does not list a price, release year, static pressure figure or included accessories, so confirm those with the retailer. Buyers wanting a 140mm PWM fan with strong airflow headroom should compare the full specs.
Frequently asked questions
Is the Thermalright TY-143 quiet?
Its rated noise is 45 dB(A) at the 2500 RPM maximum, which is loud. The fan starts at 600 RPM, so PWM control can lower speed and noise, but the data does not list a noise figure for lower speeds.
What is the TY-143 best used for?
With 130 CFM airflow and up to 2500 RPM, it suits high-airflow and high-static-pressure duties such as heatsinks, radiators or restrictive intakes. The data does not list a static pressure value, so verify that figure for radiator use.
Does the TY-143 have RGB lighting?
No. The TY-143 140mm Non-LED has no lighting, and the colour is black. It uses a 4-pin PWM connector and a dual ball bearing, with a 26.5mm thickness that is slightly deeper than standard 25mm fans.















