| Model | TORX FAN 120 |
|---|---|
| Size | 120 mm |
| Thickness | 26 mm |
| Speed range | 500–1800 RPM |
| Max airflow | 71.27 CFM |
| Max pressure | 2.09 mmH₂O |
| Max noise | 33.6 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-pin PWM |
| Lighting | None |
| Colour | Black |
TORX FAN 120 is a 120 mm 26 mm black fan rated 500-1800 RPM 71.27 CFM and 2.09 mmH2O 33.6 dBA
More MSI fans · All 120mm models · Browse the full fan database
About the MSI TORX Fan 120 Fan
The MSI TORX Fan 120 is a 120mm fan with a 26mm frame, so it fits standard 120mm mounts but is slightly thicker than common 25mm fans, which matters in tight builds. Its 500–1800 RPM range and 71.27 CFM airflow suit open case ventilation and airflow-focused positions, while the 2.09 mmH2O static pressure is modest, so it is a better match for low-restriction layouts than for dense radiators or heavily obstructed intakes.
MSI rates noise at 33.6 dB(A), which is the figure to expect near the top of the 1800 RPM range rather than at the 500 RPM minimum. The fluid dynamic bearing is listed, and the 4-pin PWM connector allows speed control from a standard motherboard header. Lighting is listed as none and the colour as black. The data does not list a price or release year, so those cannot be confirmed here.
Frequently asked questions
Is the MSI TORX Fan 120 quiet enough for a low-noise build?
MSI rates it at 33.6 dB(A), and the fan runs from 500 to 1800 RPM. The minimum 500 RPM gives you headroom to run it slower, but the data does not list noise at lower speeds, so only the 33.6 dB(A) figure is confirmed.
Is the MSI TORX Fan 120 best for radiators or case airflow?
Its 71.27 CFM airflow is the stronger figure, while static pressure is listed at 2.09 mmH2O. That points to case ventilation and low-restriction positions rather than dense radiators, where higher static pressure is usually preferred.
What size and connector does the MSI TORX Fan 120 use?
It is a 120mm fan with a 26mm thickness, so check clearance where a standard 25mm fan fits. It uses a 4-pin PWM connector for motherboard speed control. Lighting is listed as none, so there is no RGB.















