| Model | AF-125-K |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 500–2000 RPM |
| Max airflow | 78.25 CFM |
| Max pressure | 2.68 mmH₂O |
| Max noise | 29.85 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-pin PWM |
| Lighting | None |
| Colour | Black |
AF-125-K is a 120 mm 25 mm black fan rated 500-2000 RPM 78.25 CFM and 2.68 mmH2O 29.85 dBA
More ID-COOLING fans · All 120mm models · Browse the full fan database
About the ID-COOLING AF-125-K Fan
The ID-COOLING AF-125-K is a 120mm by 25mm fan built around a balance of airflow and pressure. Its 78.25 CFM airflow figure suits open case ventilation, while the 2.68 mmH2O static pressure rating makes it a reasonable candidate for pushing air through dense heatsinks, radiators or mesh filters where weaker fans struggle. Buyers should treat both numbers as manufacturer specifications rather than measured results.
Noise is rated at 29.85 dB(A), so expect audible airflow at the 2000 RPM maximum and quieter operation toward the 500 RPM minimum. The fluid dynamic bearing is the type usually chosen for longer service life, though the data does not list an MTBF figure. Mounting is standard 120mm with 25mm thickness, and the 4-pin PWM connector allows speed control from a compatible motherboard header. There is no lighting, the colour is black, and the data does not list a price or release year.
Frequently asked questions
Is the ID-COOLING AF-125-K quiet?
The manufacturer rates it at 29.85 dB(A), which is the maximum noise figure listed. Because the fan runs from 500 to 2000 RPM via 4-pin PWM, you can lower the speed for quieter operation, but the data does not give noise levels at reduced RPM.
What is the ID-COOLING AF-125-K best for?
With 78.25 CFM airflow and 2.68 mmH2O static pressure, it suits both case ventilation and pressure-demanding spots such as heatsinks, radiators or filtered intakes. The data does not include benchmark results, so suitability depends on your own setup.
Will the ID-COOLING AF-125-K fit my case or cooler?
It is a standard 120mm fan that is 25mm thick, so it fits common 120mm case mounts and cooler brackets. The 4-pin PWM connector needs a compatible header. The data does not list a price, release year or included accessories.















