| Model | Shark Fan 12cm |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 1500–1500 RPM |
| Max airflow | 82.6 CFM |
| Max pressure | 1.273 mmH₂O |
| Max noise | 26.5 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 3-pin |
| Lighting | None |
| Colour | White |
Shark Fan 12cm is a 120 mm 25 mm white fan rated 1500 RPM 82.6 CFM and 1.273 mmH2O 26.5 dBA
More AeroCool fans · All 120mm models · Browse the full fan database
About the AeroCool Shark Fan 12cm White Fan
The AeroCool Shark Fan 12cm White is a 120 mm, 25 mm thick fan that runs at a single fixed speed of 1500 RPM, so there is no PWM control to tune. Its 82.6 CFM airflow figure is high for a 120 mm fan, which suits open case ventilation and exhaust positions where moving large volumes of air matters more than pushing through dense restrictions. The 1.273 mmH2O static pressure is modest, so buyers mounting it against thick radiators or tightly packed filters should expect less effective performance than a pressure-optimised design.
At 26.5 dB(A), the noise figure is moderate rather than silent, and because the speed is fixed, that is the level you get whenever the fan is powered. The fluid dynamic bearing is listed as the bearing type, and the 3-pin connector means it plugs into a standard fan header or a voltage-controlled channel rather than a PWM header. Colour is white with no lighting. The data does not list a price or release year.
Frequently asked questions
Is the AeroCool Shark Fan 12cm White quiet?
AeroCool rates it at 26.5 dB(A). Because the fan runs at a fixed 1500 RPM with no PWM control, that is the noise level whenever it is powered, so it is moderate rather than silent.
Is this fan good for a radiator or a case exhaust?
Its 82.6 CFM airflow suits case intake and exhaust use. Static pressure is 1.273 mmH2O, which is modest, so dense radiators and tight filters are less ideal than a pressure-optimised fan.
What connector and size does the Shark Fan 12cm White use?
It is a 120 mm fan with 25 mm thickness and a 3-pin connector, so it fits standard 120 mm mounts and plugs into a fan header or voltage-controlled channel rather than a PWM header.















