| Model | TUF GAMING TR120 ARGB REVERSE |
|---|---|
| Size | 120 mm |
| Thickness | 28 mm |
| Speed range | 2000–2000 RPM |
| Max airflow | 76.3 CFM |
| Max pressure | 2.75 mmH₂O |
| Max noise | 29 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | Black |
TUF GAMING TR120 ARGB REVERSE is a 120 mm 28 mm black fan rated 2000 RPM 76.3 CFM and 2.75 mmH2O 29 dBA
More ASUS fans · All 120mm models · Browse the full fan database
About the ASUS ROG / TUF TUF Gaming TR120 ARGB Reverse Black Fan
The TUF Gaming TR120 ARGB Reverse Black is a 120 mm fan that is 28 mm thick rather than the usual 25 mm, so check clearance at the mounting point before buying. Its single 2000 RPM speed delivers 76.3 CFM of airflow and 2.75 mmH2O of static pressure, a balance that suits both open case ventilation and resistance from filters, mesh or radiators. Buyers should note the fan does not ramp down, so the 29 dB(A) rating reflects its only operating speed.
The hydraulic bearing is listed for longevity, and the 4-pin PWM connector plus 3-pin ARGB header means the fan needs a PWM header and an addressable RGB header on the motherboard or controller. The reverse blade design is intended for intake orientation. Colour is black. The manufacturer data does not list a price, release year, warranty length or included accessories, so confirm those with the retailer.
Frequently asked questions
Is the TUF Gaming TR120 ARGB Reverse Black quiet?
The manufacturer rates it at 29 dB(A) at its single 2000 RPM speed. Because it has no lower speed setting, that figure is the noise level you should expect in normal operation.
What is the reverse blade TR120 best used for?
The reverse orientation is intended for intake mounting. With 76.3 CFM airflow and 2.75 mmH2O static pressure, the data supports use on open case ventilation as well as filtered or radiator-restricted positions.
What connectors and clearance does this fan need?
It requires a 4-pin PWM header and a 3-pin ARGB header. It measures 120 mm across and 28 mm thick, so verify that your case or radiator mount accepts the extra thickness before installing.















