| Model | Shark Fan 12cm |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 1500–1500 RPM |
| Max airflow | 82.6 CFM |
| Max pressure | 1.273 mmH₂O |
| Max noise | 26.5 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 3-pin |
| Lighting | None |
| Colour | Blue |
Shark Fan 12cm is a 120 mm 25 mm blue fan rated 1500 RPM 82.6 CFM and 1.273 mmH2O 26.5 dBA
More AeroCool fans · All 120mm models · Browse the full fan database
About the AeroCool Shark Fan 12cm Blue Blue Fan
The AeroCool Shark Fan 12cm Blue Blue is a 120 mm, 25 mm thick fan that runs at a fixed 1500 RPM. Its 82.6 CFM airflow figure is strong for a 120 mm fan, which suits case ventilation and open-airflow positions where moving large volumes of air matters more than pushing through dense obstacles. The 1.273 mmH2O static pressure is modest, so buyers mounting it against thick radiators or tightly packed filters should expect it to be better suited to unrestricted intake and exhaust slots than to high-resistance cooling hardware.
At 26.5 dB(A), the noise figure is a manufacturer rating at full speed, so plan for audible airflow rather than silent operation. The fluid dynamic bearing is listed as the bearing type, and the 3-pin connector means speed control depends on your motherboard or controller rather than PWM. The fan is blue and the data lists no lighting. Mounting is standard 120 mm with 25 mm thickness. Price and release year are not listed in the data.
Frequently asked questions
Is the AeroCool Shark Fan 12cm Blue Blue quiet?
AeroCool rates it at 26.5 dB(A) at its fixed 1500 RPM. That is a manufacturer noise figure, not a measured review result, so expect audible airflow at full speed rather than near-silent operation.
What is this fan best used for?
With 82.6 CFM airflow and 1.273 mmH2O static pressure, it suits case intake and exhaust positions with low restriction. Its modest pressure makes it less ideal for thick radiators or dense filters.
Does the Shark Fan 12cm Blue Blue have RGB lighting?
No. The manufacturer data lists lighting as none, and the fan is blue. There is no RGB or addressable lighting specification, so it will not add illuminated effects to a build.















