| Model | NF-R8 redux-1800 PWM |
|---|---|
| Size | 80 mm |
| Thickness | 25 mm |
| Speed range | –1800 RPM |
| Max airflow | 31.37 CFM |
| Max pressure | 1.41 mmH₂O |
| Max noise | 17.1 dBA |
| Bearing | SSO2 |
| Connector | 4-pin PWM |
| Lighting | None |
| Colour | Grey |
NF-R8 redux-1800 PWM: Streamlined redux edition offering proven Noctua quality at an attractive price
More Noctua fans · All 80mm models · Browse the full fan database
About the NF-R8 redux-1800 PWM
The NF-R8 redux-1800 PWM is an 80mm, 25mm-thick fan running up to 1800 RPM. Its 31.37 CFM airflow and 1.41 mmH2O static pressure sit in a balanced middle ground, so it suits case exhaust and intake positions as well as lightly restrictive heatsinks or filters. Buyers pushing through dense fins or thick dust filters should note that 1.41 mmH2O is modest rather than high-pressure territory.
Noctua rates noise at 17.1 dB(A), which points to a quiet-running fan at its rated speed, though the data does not list a minimum RPM or a noise figure at lower speeds. The SSO2 bearing and 4-pin PWM connector mean speed control depends on your motherboard header, and the 80mm by 25mm frame fits standard 80mm mounts. Colour is grey with no lighting. The data does not list a price or release year.
Frequently asked questions
Is the NF-R8 redux-1800 PWM a quiet fan?
Noctua rates it at 17.1 dB(A) at its 1800 RPM maximum. The data does not list noise at reduced PWM speeds, so actual loudness will depend on the duty cycle your motherboard applies.
What is the NF-R8 redux-1800 PWM best used for?
With 31.37 CFM airflow and 1.41 mmH2O static pressure, it fits 80mm case intake or exhaust and mildly restrictive cooling setups. Very dense heatsinks or thick filters may call for higher static pressure.
Does the NF-R8 redux-1800 PWM have RGB lighting?
No. The data lists lighting as none, and the fan colour is grey. It uses a 4-pin PWM connector and an SSO2 bearing, with an 80mm diameter and 25mm thickness for standard 80mm mounting.















