| Model | NF-A6x25 5V PWM |
|---|---|
| Size | 60 mm |
| Thickness | 25 mm |
| Speed range | –3000 RPM |
| Max airflow | 11.83 CFM |
| Max pressure | 1.96 mmH₂O |
| Max noise | 19.3 dBA |
| Bearing | SSO2 |
| Connector | 4-pin PWM 5V |
| Lighting | None |
| Colour | Brown |
NF-A6x25 5V PWM: Five volt USB-powered version for non-PC cooling and DIY electronics
More Noctua fans · All 60mm models · Browse the full fan database
About the NF-A6x25 5V PWM
The NF-A6x25 5V PWM is a 60mm fan with a 25mm thickness, so it fits spaces that accept standard 60x25mm mounts. Its 11.83 CFM airflow and 1.96 mmH2O static pressure suit both open case ventilation and resistance such as heatsinks or filters, with the static pressure figure being the more useful number when air must be pushed through dense fins. At 3000 RPM the rated noise is 19.3 dB(A), which is modest for a small high-speed fan but still audible in a quiet room.
The SSO2 bearing is the same bearing type Noctua uses across its range. The 4-pin PWM connector runs on 5V, so check that your header or adapter supplies 5V rather than the usual 12V before buying. Colour is brown and there is no lighting. The data does not list a price or release year, so confirm those with the retailer.
Frequently asked questions
Is the NF-A6x25 5V PWM quiet?
Noctua rates it at 19.3 dB(A) at its 3000 RPM maximum. That is low for a 60mm fan running at that speed, but small fans at full speed are still audible in a very quiet room, so PWM control helps.
What is the NF-A6x25 5V PWM best for?
With 11.83 CFM airflow and 1.96 mmH2O static pressure, it suits 60mm case ventilation and pressure-resistant spots such as heatsinks or filters. The static pressure figure matters more when air must pass through dense fins.
Does the NF-A6x25 5V PWM have RGB lighting?
No. The data lists lighting as none, and the fan colour is brown. It is a plain 60mm, 25mm-thick fan with a 4-pin PWM connector that runs on 5V, so verify your header supplies 5V.















