| Model | NF-A8 PWM chromax.black.swap |
|---|---|
| Size | 80 mm |
| Thickness | 25 mm |
| Speed range | –2200 RPM |
| Max airflow | 32.67 CFM |
| Max pressure | 2.37 mmH₂O |
| Max noise | 17.7 dBA |
| Bearing | SSO2 |
| Connector | 4-pin PWM |
| Lighting | None |
| Colour | Black |
NF-A8 PWM chromax.black.swap: All-black chromax edition with swappable coloured anti-vibration pads
More Noctua fans · All 80mm models · Browse the full fan database
About the NF-A8 PWM chromax.black.swap
The NF-A8 PWM chromax.black.swap is an 80mm fan that is 25mm thick, so it suits standard 80mm mounting positions rather than slim spaces. Its 2200 RPM ceiling produces 32.67 CFM of airflow and 2.37 mmH2O of static pressure. That pressure figure is useful for pushing air through a heatsink or a restrictive vent, while the airflow suits general case exhaust or intake duty. The rated noise is 17.7 dB(A), which gives a quiet expectation at the specified operating point, though the data does not list a minimum RPM or a noise curve.
The SSO2 bearing and 4-pin PWM connector mean the fan can be speed-controlled by a compatible motherboard header. There is no lighting, and the colour is black. The data does not list a price or a release year, so those cannot be confirmed here. Buyers should confirm an 80mm, 25mm-deep mounting space and a free 4-pin PWM header before ordering.
Frequently asked questions
Is the NF-A8 PWM chromax.black.swap quiet?
Noctua rates this fan at 17.7 dB(A) at its 2200 RPM maximum. The data does not list a minimum speed or a full noise curve, so the figure given is the only noise value available for comparison.
What is the NF-A8 PWM chromax.black.swap best for?
With 32.67 CFM airflow and 2.37 mmH2O static pressure at 2200 RPM, it suits 80mm case intake or exhaust and pressure-resistant spots such as heatsinks or restrictive vents. The data does not list specific cooler compatibility.
Does the NF-A8 PWM chromax.black.swap have RGB lighting?
No. The manufacturer data lists lighting as none, and the colour as black. It uses a 4-pin PWM connector for speed control and an SSO2 bearing, but no RGB or addressable lighting is specified.















