| Model | SST-AS90B-ARGB |
|---|---|
| Size | 92 mm |
| Thickness | 15.2 mm |
| Speed range | 500–2500 RPM |
| Max airflow | 45.73 CFM |
| Max pressure | 2.29 mmH₂O |
| Max noise | 32 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-Pin PWM + 4-1 Pin ARGB |
| Lighting | ARGB |
| Colour | Black |
SST-AS90B-ARGB is a 15.2 mm thick 92 mm ARGB fan reaching 2500 RPM with 45.73 CFM and 2.29 mmH2O static pressure
More SilverStone fans · All 92mm models · Browse the full fan database
About the SilverStone Air Slimmer 90 ARGB
The Air Slimmer 90 ARGB is a 92 mm fan just 15.2 mm thick, so it suits tight builds where a standard 25 mm fan will not clear the cooler, case panel or radiator. Its 500–2500 RPM range spans quiet low-speed running and a high-RPM ceiling, and the rated 45.73 CFM airflow with 2.29 mmH2O static pressure means it is specified for both open case ventilation and pressure-resistant spots such as heatsinks and radiators. At full speed SilverStone rates noise at 32 dB(A), so expect the loudest operation at 2500 RPM and quieter running toward the 500 RPM minimum.
A 4-pin PWM connector lets the motherboard control speed, while the 4-1 pin ARGB connector handles lighting separately, so plan for an ARGB header or controller. The hydraulic bearing is the listed bearing type, and the fan is black. The data does not list a price or release year, so check the retailer for current pricing before buying.
Frequently asked questions
Is the SilverStone Air Slimmer 90 ARGB quiet?
SilverStone rates it at up to 32 dB(A), which is the figure at its 2500 RPM maximum. Because it starts at 500 RPM, PWM control lets you run it slower and quieter when full airflow is not needed.
What is the Air Slimmer 90 ARGB best for?
Its 15.2 mm thickness suits space-limited builds, while 45.73 CFM airflow and 2.29 mmH2O static pressure make it specified for case ventilation and pressure-resistant spots such as heatsinks or radiators.
Does the Air Slimmer 90 ARGB need a special header?
It uses a 4-pin PWM connector for fan speed and a separate 4-1 pin ARGB connector for lighting, so you need an ARGB header or controller on your motherboard or hub for the lighting to work.














