No official product photo is published for this model. Specifications below are sourced from the manufacturer's own documentation.
| Model | SST-AFA120XB-ARGB |
|---|---|
| Size | 120 mm |
| Thickness | 28 mm |
| Speed range | 600–2100 RPM |
| Max airflow | 64.27 CFM |
| Max pressure | 2.57 mmH₂O |
| Max noise | 32.4 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-Pin PWM + 4-1 Pin ARGB |
| Lighting | ARGB |
| Colour | Black |
SST-AFA120XB-ARGB is a 28 mm thick 120 mm ARGB fan reaching 2100 RPM with 64.27 CFM and 2.57 mmH2O static pressure
More SilverStone fans · All 120mm models · Browse the full fan database
About the SilverStone Air Frost A120X ARGB
The Air Frost A120X ARGB is a 120mm fan with a 28mm frame, so it is thicker than a standard 25mm fan and needs a little more clearance at the mounting point. Its 2.57 mmH2O static pressure suits heatsinks, radiators and restrictive front intakes, while 64.27 CFM of airflow keeps it useful as a general case fan. At 2100 RPM the rated noise is 32.4 dB(A); the 600 RPM minimum gives a slower option, though the data does not list a noise figure for that speed.
The hydraulic bearing is rated for the fan's lifetime, and the 4-Pin PWM connector allows speed control from the motherboard. Lighting uses a 4-1 Pin ARGB connector, so the fan needs an ARGB header or controller for its LEDs. Colour is black. The data does not list a price or release year, so check the retailer for current pricing before buying.
Frequently asked questions
Is the SilverStone Air Frost A120X ARGB quiet?
SilverStone rates it at 32.4 dB(A) at its 2100 RPM maximum. The fan can run as low as 600 RPM via 4-Pin PWM, but the data does not list a noise figure for that lower speed.
What is the Air Frost A120X ARGB best for?
With 2.57 mmH2O static pressure and 64.27 CFM airflow, it suits heatsinks, radiators and restrictive intakes, and also works as a case fan. Its 28mm thickness needs extra mounting clearance.
Does the A120X ARGB need a special connector for the RGB?
Yes. It uses a 4-1 Pin ARGB connector for lighting plus a 4-Pin PWM connector for fan speed, so you need an ARGB header or controller on your motherboard or hub.















