| Model | TL-D14S ARGB |
|---|---|
| Size | 140 mm |
| Thickness | 27 mm |
| Speed range | –1500 RPM |
| Max airflow | 77.8 CFM |
| Max pressure | 2.09 mmH₂O |
| Max noise | 25.6 dBA |
| Bearing | S-FDB Bearing |
| Connector | 4-pin PWM + 3-pin 5V ARGB |
| Lighting | ARGB |
| Colour | Black |
TL-D14S ARGB is a rounded frame model with ARGB rated up to 1500 rpm with 77.8 CFM and 2.09 mmH2O static pressure
More Thermalright fans · All 140mm models · Browse the full fan database
About the TL-D14S ARGB 140mm ARGB Fan
The TL-D14S ARGB 140mm pairs 77.8 CFM of airflow with 2.09 mmH2O of static pressure at a maximum 1500 RPM, so it sits in a balanced middle ground. That pressure figure is enough for heatsinks and radiators with moderate fin density, while the airflow suits open case intake and exhaust positions. Buyers pushing through thick, tightly packed radiators should expect the 2.09 mmH2O rating to be the limiting number rather than the CFM.
Noise is rated at 25.6 dB(A) at maximum speed, which is a moderate figure for a 140mm fan at 1500 RPM. The S-FDB bearing is the listed bearing type. Mounting follows the standard 140mm frame at 27mm thickness, and the 4-pin PWM header controls speed while a separate 3-pin 5V ARGB connector handles lighting. The data does not list a price or release year, so check the retailer for current pricing.
Frequently asked questions
Is the Thermalright TL-D14S ARGB 140mm quiet?
Thermalright rates it at 25.6 dB(A) at its 1500 RPM maximum, which is a moderate figure for a 140mm fan. The data does not list noise at lower PWM speeds, so expect quieter running when the 4-pin PWM header reduces RPM.
What is the TL-D14S ARGB best used for?
With 77.8 CFM and 2.09 mmH2O, it suits case intake and exhaust plus moderate-density heatsinks or radiators. The static pressure is the limiting figure for very thick, tightly finned radiators, where the airflow rating matters less.
Does the TL-D14S ARGB fit a standard 140mm mount and motherboard ARGB header?
It uses a 140mm frame at 27mm thickness, so it fits standard 140mm case and cooler mounts. It needs a 4-pin PWM fan header and a separate 3-pin 5V ARGB header, so confirm your board has a 5V ARGB connector.















