| Model | TL-P12-S |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | –1500 RPM |
| Max airflow | 52.86 CFM |
| Max pressure | 1.53 mmH₂O |
| Max noise | 22.1 dBA |
| Bearing | S-FDB Bearing |
| Connector | 4-pin PWM + 3-pin 5V ARGB |
| Lighting | ARGB |
| Colour | Black |
TL-P12-S is a silent tuned model with ARGB lighting rated up to 1500 rpm with 52.86 CFM and 1.53 mmH2O static pressure
More Thermalright fans · All 120mm models · Browse the full fan database
About the TL-P12-S 120mm ARGB Fan
The TL-P12-S is a 120mm by 25mm fan rated at 1500 RPM, moving 52.86 CFM at 1.53 mmH2O of static pressure. That balance suits case exhaust and intake positions, and it can push through a radiator or mesh filter without the pressure figure collapsing. The 22.1 dB(A) rating is a manufacturer figure, so treat it as the expected ceiling at full speed rather than a measured result.
Mounting is standard 120mm with 25mm thickness, so it fits common case and cooler slots. The 4-pin PWM header controls speed, and the separate 3-pin 5V ARGB connector needs an addressable RGB header on the board or controller. The S-FDB bearing is the listed bearing type. Colour is black. The data does not list a price or release year, so check the retailer for current pricing.
Frequently asked questions
Is the Thermalright TL-P12-S quiet enough for a low-noise build?
Thermalright rates the TL-P12-S at 22.1 dB(A) at its 1500 RPM maximum. That is a manufacturer rating, not a measured review result, so expect the fan to be quietest when PWM lowers the speed below the maximum.
Is the TL-P12-S better for case airflow or for a radiator?
It lists 52.86 CFM airflow and 1.53 mmH2O static pressure. The pressure figure is modest but usable against filters and radiator fins, while the airflow suits open case intake and exhaust positions. The data does not list radiator-specific performance.
What connectors and size does the TL-P12-S need?
It is a 120mm fan with 25mm thickness, using a 4-pin PWM connector for power and speed control plus a separate 3-pin 5V ARGB connector for lighting. Your motherboard or controller needs a 5V addressable RGB header for the lighting to work.















