| Model | TL-B14W |
|---|---|
| Size | 140 mm |
| Thickness | 25 mm |
| Speed range | –1500 RPM |
| Max airflow | 82.5 CFM |
| Max pressure | 2.35 mmH₂O |
| Max noise | 27.6 dBA |
| Bearing | S-FDB V2 Bearing |
| Connector | 4-pin PWM |
| Lighting | None |
| Colour | White |
TL-B14W is a white 140 mm high pressure model rated up to 1500 rpm with 82.5 CFM and 2.35 mmH2O static pressure
More Thermalright fans · All 140mm models · Browse the full fan database
About the TL-B14W 140mm Non-LED Fan
The TL-B14W is a 140mm, 25mm-thick white fan rated at 1500 RPM, moving 82.5 CFM against 2.35 mmH2O of static pressure. That balance suits both open case ventilation and airflow-restricted spots such as heatsinks or radiator fins, where pressure matters more than raw volume. Buyers chasing maximum open-air exhaust can run it at full speed; those with dense fins should expect the pressure rating to do the work.
Noise is listed at 27.6 dB(A), so treat it as a moderate-speed fan rather than a near-silent one, and PWM control via the 4-pin connector lets you dial speed down. The S-FDB V2 bearing is the stated bearing type, and the fan has no lighting. Mounting hardware and price are not listed in the manufacturer data, so confirm those with the retailer. The 140mm size and 25mm thickness fit standard 140mm case and cooler mounts.
Frequently asked questions
Is the Thermalright TL-B14W quiet at 1500 RPM?
The manufacturer lists 27.6 dB(A) for this fan, which is a moderate noise figure rather than a silent one. Because it uses a 4-pin PWM connector, you can lower the speed to reduce noise if your motherboard supports fan curve control.
Is the TL-B14W better for case airflow or radiators?
It is rated at 82.5 CFM airflow and 2.35 mmH2O static pressure, so it covers both roles. The pressure figure makes it usable on heatsinks and radiator fins, while the airflow figure suits open case intake and exhaust positions.
Does the TL-B14W have RGB lighting and what size is it?
No, the manufacturer data lists lighting as none, and the fan is white. It is a 140mm fan with 25mm thickness, so it fits standard 140mm case and cooler mounting positions. Mounting hardware and price are not listed in the data.















