| Model | CL-F203-PL14MG-A |
|---|---|
| Size | 140 mm |
| Thickness | 25 mm |
| Speed range | 500–1500 RPM |
| Max airflow | 77.37 CFM |
| Max pressure | 2.23 mmH₂O |
| Max noise | 30.5 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-Pin PWM + 3-Pin ARGB |
| Lighting | ARGB |
| Colour | Matcha Green |
CL-F203-PL14MG-A is a 25 mm thick 140 mm ARGB fan reaching 1500 RPM with 77.37 CFM and 2.23 mmH2O static pressure
More Thermaltake fans · All 140mm models · Browse the full fan database
About the Thermaltake CT140 ARGB Sync Matcha Green 2-Fan Pack
The CT140 ARGB Sync Matcha Green 2-Fan Pack pairs two 140 mm fans with a 25 mm thickness, so they suit standard 140 mm case and cooler mounting points. The 500-1500 RPM range lets you run them slow for near-silent idle airflow or push them to the top end when load rises. At maximum, Thermaltake rates 77.37 CFM airflow and 2.23 mmH2O static pressure, a balance that works for open case ventilation and for pushing through radiators or dense filters where pressure matters more than raw volume.
Noise is listed at 30.5 dB(A), which is the figure to expect near full speed rather than at the 500 RPM floor. Each fan uses a hydraulic bearing and a 4-Pin PWM connector for speed control, plus a separate 3-Pin ARGB connector for the lighting, so your motherboard needs both a PWM header and an ARGB header. The matcha green colour is a cosmetic choice specific to this SKU. The data does not list a price or release year.
Frequently asked questions
Are the Thermaltake CT140 ARGB fans quiet?
Thermaltake rates the CT140 at 30.5 dB(A), which is the listed figure at maximum 1500 RPM. Because the fans start at 500 RPM, you can lower speed through the 4-Pin PWM connector to reduce noise under light loads.
What are these fans best for, airflow or radiators?
The data lists 77.37 CFM airflow and 2.23 mmH2O static pressure, so the CT140 offers both decent open-case airflow and enough pressure for radiators or filters. The 140 mm size and 25 mm thickness fit standard 140 mm mounting points.
Do the CT140 ARGB fans need a special motherboard header?
Each fan uses a 4-Pin PWM connector for speed control and a separate 3-Pin ARGB connector for lighting. Your motherboard or controller needs an ARGB header to drive the lighting; the data does not list a price or release year.
More Thermaltake fans
Other 140mm fans
Thermaltake TOUGHFAN EX 140 ARGB Sync White 3-Fan Pack
Thermaltake SWAFAN 140 EX INFINITY ARGB Sync 3-Fan Pack
Thermaltake Riing Quad 14 RGB Radiator Fan TT Premium Edition 3-Fan Pack
Thermaltake Riing Duo 14 RGB Radiator Fan TT Premium Edition 3-Fan Pack
Thermaltake Riing Plus 14 RGB Radiator Fan TT Premium Edition 3-Fan Pack
Thermaltake Riing 14 RGB Radiator Fan TT Premium Edition









